{"title":"2021+ Bronco 2-4 Inch Lift Kits","description":"\u003cp\u003eThe 2021+ Bronco uses independent front suspension and a solid rear axle on coil springs. A 2 to 4 inch lift is the sweet spot for most owners: enough room for 35 inch tires while keeping a good ride on the road. Every kit on this page lifts the Bronco 2 to 4 inches. They are for the standard Bronco, not the Bronco Raptor or the Bronco Sport. Brands here are ICON, BDS, ReadyLift and Zone Offroad.\u003c\/p\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-left:4px solid #151515;border-radius:8px;padding:16px 20px;margin:24px 0;\"\u003e\n\u003cp style=\"font-family:'Bebas Neue',Anton,sans-serif;font-weight:400;letter-spacing:.3px;font-size:22px;line-height:1.1;margin:0 0 6px;\"\u003eStart here\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eSasquatch or not.\u003c\/strong\u003e Sasquatch Broncos ride higher from the factory, so the same kit nets a different height. ICON quotes its lift heights for non-Sasquatch trucks, and some kits are built only for Sasquatch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"font-family:'Bebas Neue',Anton,sans-serif;font-weight:400;letter-spacing:.3px;font-size:30px;line-height:1.1;margin:32px 0 14px;\"\u003eHow to choose\u003c\/h3\u003e\n\u003cdiv style=\"display:grid;grid-template-columns:repeat(auto-fit,minmax(240px,1fr));gap:12px;\"\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-radius:8px;padding:14px 16px;\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:700;\"\u003e2-door or 4-door\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;line-height:22px;\"\u003eA 2-door sits taller than a 4-door with the same kit, and some kits are 2-door only. Check the listing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-radius:8px;padding:14px 16px;\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:700;\"\u003eSpacer kit or coilovers\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;line-height:22px;\"\u003eSpacer kits from ICON, BDS and ReadyLift keep your factory shocks and are the simplest install. Coilover kits replace the shocks with height-adjustable coilovers, many with reservoirs. ICON CDCV kits add compression adjustment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-radius:8px;padding:14px 16px;\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:700;\"\u003eUpper control arms\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;line-height:22px;\"\u003eLifting the front steepens the upper ball joint and CV angles. Kits with tubular or HD upper control arms restore alignment range and travel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-radius:8px;padding:14px 16px;\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:700;\"\u003eTires\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;line-height:22px;\"\u003e35 inch tires are the usual target. ICON notes that 37s need bump stop spacers or travel limiters plus trimming. Use the wheel backspacing listed in the kit notes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#fff;border:1px solid rgba(21,21,21,.14);border-radius:8px;padding:14px 16px;\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:700;\"\u003eAlignment\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;line-height:22px;\"\u003eEvery lift needs an alignment after install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"font-family:'Bebas Neue',Anton,sans-serif;font-weight:400;letter-spacing:.3px;font-size:30px;line-height:1.1;margin:36px 0 6px;\"\u003eCommon questions\u003c\/h3\u003e\n\u003cdetails style=\"border-bottom:1px solid rgba(21,21,21,.14);padding:14px 0;\"\u003e\u003csummary style=\"cursor:pointer;font-weight:700;display:flex;justify-content:space-between;gap:16px;list-style:none;\"\u003eWhat tire size fits with a 2-4 inch Bronco lift?\u003cspan aria-hidden=\"true\" style=\"font-weight:400;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\u003cp style=\"margin:10px 0 0;\"\u003e35 inch tires are the common fit. 37s are possible with some kits but need extra parts and trimming. Each listing gives its tire and wheel recommendation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"border-bottom:1px solid rgba(21,21,21,.14);padding:14px 0;\"\u003e\u003csummary style=\"cursor:pointer;font-weight:700;display:flex;justify-content:space-between;gap:16px;list-style:none;\"\u003eWill these kits fit a Bronco Raptor?\u003cspan aria-hidden=\"true\" style=\"font-weight:400;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\u003cp style=\"margin:10px 0 0;\"\u003eNo. The Raptor uses different suspension. Kits on this page are for the standard Bronco, and several listings say outright that they do not fit the Raptor.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"border-bottom:1px solid rgba(21,21,21,.14);padding:14px 0;\"\u003e\u003csummary style=\"cursor:pointer;font-weight:700;display:flex;justify-content:space-between;gap:16px;list-style:none;\"\u003eDo I need new upper control arms?\u003cspan aria-hidden=\"true\" style=\"font-weight:400;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\u003cp style=\"margin:10px 0 0;\"\u003eMany kits include them. If yours does not, aftermarket upper arms help restore camber and caster adjustment at the top of the lift range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"border-bottom:1px solid rgba(21,21,21,.14);padding:14px 0;\"\u003e\u003csummary style=\"cursor:pointer;font-weight:700;display:flex;justify-content:space-between;gap:16px;list-style:none;\"\u003eWhy does my 2-door sit higher than a friend's 4-door with the same kit?\u003cspan aria-hidden=\"true\" style=\"font-weight:400;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\u003cp style=\"margin:10px 0 0;\"\u003eThe 2-door is lighter, so the same springs hold it higher. Kit makers note this in their lift heights.\u003c\/p\u003e\u003c\/details\u003e","products":[{"product_id":"2021-2024-bronco-35-inch-sst-lift-kit-62-21360","title":"2021-2025 Bronco 3.5\" SST Lift Kit (62-21360)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAmplify the off-road prowess of your Bronco with this SST 3.3 Series 3.5\" Lift Kit. Featuring the Falcon 3.3 Series Fast Adjust Coilovers that come with a quick adjust 8-position knob to easily set your ride comfort levels from soft to firm, perfect for high cruises to rock crawling! T\u003c\/span\u003e\u003cspan\u003ehis piggyback system provides unequaled off-road articulation and highway control, utilizing Falcon’s exclusive Fast Adjust tuning technology. Proprietary sealed Gimbal lock mount bearings provide solid, quiet, and positive control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 62-21360\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNew UCAs use forged chromoly bushing rod ends for extended durability\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.3 Fast Adjust Coilover Piggyback Shocks provide unequaled off-road capability and highway control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHD DOM tube steel UCAs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTerrain Control Technology Flex Joints at both ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTrack Bar Axle Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCNC-machined 6061 Aluminum construction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTire Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for up to 37x12.50 tall tires when used on 17\"x8.5\" wide wheels with a +18mm offset\u003c\/li\u003e\n\u003cli\u003eMax tire size with trimming 38\"x12.50\" on 17\"x8.5\" wide wheels with a +18mm offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eAdditional Info\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFalcon 3.3 Coilover, Front \u0026amp; Rear Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Upper Control Arm, Left\u003c\/li\u003e\n\u003cli\u003eBillet Upper Control Arm, Right\u003c\/li\u003e\n\u003cli\u003eRear Lower Control Arm, Left\u003c\/li\u003e\n\u003cli\u003eRear Lower Control Arm, Right \u003c\/li\u003e\n\u003cli\u003eRear Track Bar, Bronco \u003c\/li\u003e\n\u003cli\u003eBronco Premium Rear Track Bar Bracket, Kit\u003c\/li\u003e\n\u003cli\u003eBronco Rear Brake Line Bracket\u003c\/li\u003e\n\u003cli\u003eBronco Rear Brake Line Bracket, Center\u003c\/li\u003e\n\u003cli\u003eBronco Rear ABS Bracket\u003c\/li\u003e\n\u003cli\u003e1 1\/4\" Crowfoot Wrench (3\/8\" Drive)\u003c\/li\u003e\n\u003cli\u003eHardware Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNot for use on Ford Bronco Sport or Raptor editions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":42625191051353,"sku":"62-21360","price":7149.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2021-2024-Bronco-3_5-SST-Lift-Kit-62-21360-Lift-Kit-ReadyLift-Canada.jpg?v=1756333589"},{"product_id":"2021-2024-bronco-4-hd-sst-lift-kit-69-21410","title":"2021-2024 Bronco 4\" HD SST Lift Kit (69-21410)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: Will NOT fit Bronco Sport models\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered to give your Bronco superior off-road performance, durability over any terrain, and a more aggressive curb appeal, especially if you plan on installing larger wheels and tires. This ReadyLift 4\" SST Lift Kit features fully bolt-on, high-angle HD ball joints pre-installed into the control arms, eliminating the need to modify the factory ball joints. This prevents ball joint binding, effectively improving articulation and maintaining factory geometry for an overall amazing ride!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e69-21410\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e100% bolt-on installation ‚no modifications required\u003c\/li\u003e\n\u003cli\u003eCNC machine aircraft-grade 6061 T6 billet Aluminum front spacers\u003c\/li\u003e\n\u003cli\u003eCNC turned 4130 Chromoly front preload spacers\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel offset rear spacers\u003c\/li\u003e\n\u003cli\u003e.250\" steel heavy-duty rear track bar bracket to optimize rear geometry\u003c\/li\u003e\n\u003cli\u003eHigh-performance tubular upper control arms\u003c\/li\u003e\n\u003cli\u003eCorrected ball joint angle and position to address caster\/camber\u003c\/li\u003e\n\u003cli\u003eDust cap to protect from debris\u003c\/li\u003e\n\u003cli\u003eHigh-grade hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Front strut spacers\u003c\/li\u003e\n\u003cli\u003e(2) Front preload spacers\u003c\/li\u003e\n\u003cli\u003e(1) Left upper control arm w\/ ball joint \u003c\/li\u003e\n\u003cli\u003e(1) Right upper control arm w\/ ball joint \u003c\/li\u003e\n\u003cli\u003e(2) Rear strut spacers\u003c\/li\u003e\n\u003cli\u003e(1) Rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eRear brake line bracket\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eAdditional Info\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cstrong\u003eTire Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for up to 37x12.50 tall tires when used on 17\"x8.5\" wide wheels with a +18mm offset\u003c\/li\u003e\n\u003cli\u003e*Max tire size with trimming 38\"x12.50\" on 17\"x8.5\" wide wheels with a +18mm offset*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eNotes\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eAlthough 37\" x 12.50\" will work at ride height, the tires will still contact the front body mount and possibly the rear inner fender through wheel travel and steering lock to lock. If running this size tire and using the full suspension travel, these areas must be addressed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor standard suspension Broncos ONLY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNot for use on Sasquatch Package-equipped vehicles, Badland, and Wildtrack equipped with Hoss 3.0 Fox shocks\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":42625352663129,"sku":"69-21410","price":1364.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2021-2024-Bronco-4-HD-SST-Lift-Kit-69-21410-Lift-Kit-ReadyLift-Canada.jpg?v=1756337716"},{"product_id":"2021-2022-bronco-3-sst-lift-kit-69-21310","title":"2021-2024 Bronco 3\" SST Lift Kit (69-21310)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: Will NOT fit any Bronco Sport models\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFor those who own the Sasquatch package, you are well aware that these Broncos are built for some serious off-roading. With locking front and rear axles, high-clearance suspension, and aggressive fender flares, not just any lift kit will do. \u003c\/p\u003e\n\u003cp\u003eReadyLift has engineered this kit specifically for the Sasquatch package-equipped Bronco, giving you superior performance, durability, and unmatched curb appeal. Featuring fully bolt-on, high-angle HD ball joints pre-installed into the tubular control arms, eliminating the need to modify your OEM ball joints, effectively maintaining your factory geometry, and vastly improving articulation over any trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e69-21310\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e100% bolt-on installation, no modifications required\u003c\/li\u003e\n\u003cli\u003eCNC-machined aircraft-grade 6061 T6 billet Aluminum front spacers\u003c\/li\u003e\n\u003cli\u003eCNC turned 4130 Chromoly front preload spacers\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel offset rear spacers\u003c\/li\u003e\n\u003cli\u003e.250\" steel heavy-duty rear track bar bracket to optimize rear geometry\u003c\/li\u003e\n\u003cli\u003eHigh-performance tubular upper control arms\u003c\/li\u003e\n\u003cli\u003eCorrected ball joint angle and position to address caster\/camber\u003c\/li\u003e\n\u003cli\u003eDust cap to protect from debris\u003c\/li\u003e\n\u003cli\u003eHigh-grade hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Front strut spacers\u003c\/li\u003e\n\u003cli\u003e(2) Front preload spacers\u003c\/li\u003e\n\u003cli\u003e(1) Left upper control arm\u003c\/li\u003e\n\u003cli\u003e(1) Right upper control arm\u003c\/li\u003e\n\u003cli\u003e(2) Rear strut spacers\u003c\/li\u003e\n\u003cli\u003e(1) Rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eRear brake line bracket\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eAdditional Info\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cstrong\u003eTire Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for up to 37x12.50\" tall tires when used on 17\"x8.5\" wide wheels with a +18mm offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire size with trimming\u003c\/strong\u003e 38\"x12.50\" on 17\"x8.5\" wide wheels with a +18mm offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eNotes\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eAlthough 37\" x 12.50\" will work at ride height, the tires will still contact the front body mount and possibly the rear inner fender through wheel travel and steering lock to lock. If running this size tire and using the full suspension travel, these areas must be addressed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-stringify-indent=\"2\" data-stringify-border=\"0\"\u003eDesigned exclusively for Sasquatch Package-equipped vehicles, including Badlands, Wildtrak, First Edition, and Wildtrack.\u003c\/li\u003e\n\u003cli data-stringify-indent=\"2\" data-stringify-border=\"0\"\u003eNot for use on Bronco Sport or vehicles equipped with Hoss 3.0 Fox shocks.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":42625352826969,"sku":"69-21310","price":1364.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2021-2024-Bronco-3-SST-Lift-Kit-69-21310-Lift-Kit-ReadyLift-Canada.jpg?v=1756337719"},{"product_id":"2021-2025-bronco-2-door-3-5-lift-with-hd-upper-control-arms-bds023351","title":"2021-2025 Bronco 2 Door 3.5\" Lift with HD Upper Control Arms (BDS023351)","description":"\u003cp\u003eUpgrade you Ford Bronco 2 Door with this comprehensive 3.5-inch lift kit from BDS Suspension. Designed to enhance both appearance and offroad performance, this kit includes everything needed for proper clearance and suspension geometry, allowing tire sizes up to 35\". The kit incorporates heavy-duty components such as reinforcement sleeves and HD upper control arms to ensure strength and reliability during demanding trail conditions.\u003c\/p\u003e\n\u003cp\u003eBuilt to outperform, this lift kit improves vehicle stance and capability without compromising ride quality or overextending suspension or driveline angles at full droop. The innovative 2-piece strut spacer design adds the proper preload to prevent damage to ball joints and CVs. The HD upper control arms enhance strength, travel, and camber adjustment, using high-quality materials and components finished in a durable black powder coat. Whether leveling or lifting your Bronco, this kit is ready to bolt in and perform from the moment of installation.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2021-2025 Ford Bronco 2 Door models with AWD and front and rear drive positions\u003c\/li\u003e\n\u003cli\u003e3.5-inch suspension lift kit improving stance, performance, and offroad capability\u003c\/li\u003e\n\u003cli\u003eIncludes heavy-duty tie rod reinforcement sleeves for enhanced durability on the trail\u003c\/li\u003e\n\u003cli\u003e2-piece strut spacer design maintains vehicle ride quality without overextending suspension during down travel\u003c\/li\u003e\n\u003cli\u003eHD upper control arms feature 1.5\" OD x .120-wall tubular construction for strength and increased travel\u003c\/li\u003e\n\u003cli\u003eIndexed ball joint cup corrects positioning to allow additional down travel and camber adjustment\u003c\/li\u003e\n\u003cli\u003eDurometer-specific rubber bushings provide maintenance-free operation\u003c\/li\u003e\n\u003cli\u003eFK uniball joints ensure maximum travel and durability\u003c\/li\u003e\n\u003cli\u003eFinished in durable black powder coat with billet aluminum dust caps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684401778777,"sku":"BDS023351","price":1769.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_023351_01.jpg?v=1758726902"},{"product_id":"2021-2025-bronco-3-lift-sasquatch-spacer-bds023301","title":"2021-2025 Bronco 3\" Lift Kit w\/ HD Upper Control Arms (BDS023301)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eBDS's 3 inch Bronco kit is engineered for tire clearance and trail performance without over-extending the suspension or the driveline at full droop. Instead of one tall spacer, it uses a small pre-load spacer and a top spacer so ball joints and CVs stay within their limits, and it adds heavy-duty 1.5 inch tubular upper control arms with FK uniball joints for travel and strength. A pair of heavy-duty tie rod reinforcement sleeves is in the box for peace of mind on the trail. Clears 35 inch tires.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e3 inch lift with clearance for up to 35 inch tires\u003c\/li\u003e\n\u003cli\u003eTwo-piece strut spacer design keeps ride quality without over-extending the suspension during down travel\u003c\/li\u003e\n\u003cli\u003eHeavy-duty upper control arms: 1.5 inch OD x .120 wall tubing, indexed ball joint cup, FK uniball for maximum travel\u003c\/li\u003e\n\u003cli\u003eDurometer-specific rubber bushings at the frame mounts for maintenance-free operation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty tie rod reinforcement sleeves included\u003c\/li\u003e\n\u003cli\u003eMaintains vehicle ride and handling performance while improving off-road capability\u003c\/li\u003e\n\u003cli\u003eBlack powder coat finish with billet aluminum dust caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLift height: 3 in.\u003c\/li\u003e\n\u003cli\u003eLift method: two-piece strut spacer (pre-load spacer plus top spacer)\u003c\/li\u003e\n\u003cli\u003eMax tire size: 35 in.\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePart number: BDS023301\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBDS fitment lists 2021-2025 Bronco Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Heritage and Stroppe editions; some rows are tagged 2-door, so confirm 4-door coverage with BDS before relying on it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684402008153,"sku":"BDS023301","price":1769.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_023301_01.jpg?v=1758726935"},{"product_id":"2021-2025-bronco-3-lift-sasquatch-spacer-bds023300","title":"2021-2025 Bronco 3\" Lift Sasquatch Spacer (BDS023300)","description":"\u003cp\u003eBDS 3\" Sasquatch lift spacer kit for 2021-2025 Ford Bronco 4-door 4WD, front and rear. The 2-piece strut spacer design holds factory ride quality and prevents overextension during down travel, clearing up to 35\" tires without hurting driveline angles. Includes heavy-duty tie rod reinforcement sleeves.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains vehicle ride and handling performance while improving offroad capability.\u003c\/li\u003e\n\u003cli\u003e2-piece strut spacer design maintains ride quality without overextending suspension during down travel.\u003c\/li\u003e\n\u003cli\u003eIncludes heavy-duty tie rod reinforcement sleeves for added durability on trails.\u003c\/li\u003e\n\u003cli\u003eEngineered to provide clearance for up to 35\" tires without compromising suspension or driveline angles.\u003c\/li\u003e\n\u003cli\u003eUtilizes a small pre-load spacer combined with a top spacer to properly achieve the lift height.\u003c\/li\u003e\n\u003cli\u003eCompatible with 2021-2025 Ford Bronco 4 Door 4WD models, installed on front and rear.\u003c\/li\u003e\n\u003cli\u003eAftermarket suspension lift kit by BDS Suspension, designed for performance and strength.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684414623833,"sku":"BDS023300","price":1769.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_023300_01.jpg?v=1758727003"},{"product_id":"2021-2025-bronco-4-lift-fox-2-5-performance-elite-bds2500fpe","title":"2021-2025 Bronco 4\" Lift Kit (BDS2500FPE)","description":"\u003cp\u003eBuild the ultimate 2021-2025 Ford Bronco with the BDS KOH Edition suspension package, proven by KOH racer Jason Scherer on the King of Hammers course, with clearance for up to 37\" tires. Up front it runs FOX 2.5 Performance Elite remote-reservoir coil-overs, heavy-duty tubular upper control arms, steering tie rod sleeves, a max tire clearance kit for 37s and lower control arm skid plates. The rear runs matching FOX 2.5 coil-overs, lower tubular trailing arms built from 1.9\" heavy-wall tubing, an adjustable track bar and lower shock skids. The FOX 2.5 shocks add a remote reservoir for cooling and a Dual Speed Compression adjuster with 10 low-speed and 12 high-speed settings.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Performance Elite coil-overs offer improved damper performance over stock\u003c\/li\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow more suspension travel\u003c\/li\u003e\n\u003cli\u003eRear trailing arms built from 1.9 inch OD heavy-wall tubing with factory-style rubber bushings\u003c\/li\u003e\n\u003cli\u003eAdjustable rear track bar for proper rear axle alignment\u003c\/li\u003e\n\u003cli\u003eSteering tie rod sleeves increase the diameter of the factory tie rods\u003c\/li\u003e\n\u003cli\u003eThick steel skid plates protect shocks from damage\u003c\/li\u003e\n\u003cli\u003eMax tire clearance kit allows room for 37 inch tires without rubbing\u003c\/li\u003e\n\u003cli\u003eDurable textured black powdercoat finish\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to install out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDo NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use the appropriate ball joint separation tool (OTC 204592).\u003c\/li\u003e\n\u003cli\u003eWill not work with models that have a height sensor attached to the UCA.\u003c\/li\u003e\n\u003cli\u003eDoes not fit Bronco Sport models.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Raptor models.\u003c\/li\u003e\n\u003cli\u003eCompatible with HOSS 3.0 Bronco models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eIncludes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBDS343009, 2021-2023 Ford Bronco, Rear Track Bar (UPC 711745613744)\u003c\/li\u003e\n\u003cli\u003eBDS743000, 2021-2023 Ford Bronco, Suspension Skid Front\/Rear Box Kit (UPC 711745613768)\u003c\/li\u003e\n\u003cli\u003eBDS743001, 2021-2023 Ford Bronco, Front UCA, Body Mount, Tie Rod Sleeve Box Kit (UPC 711745613751)\u003c\/li\u003e\n\u003cli\u003eBDS743009, 2021-2023 Ford Bronco, Rear Control Arms - Rubber Bushings (UPC 711745613737)\u003c\/li\u003e\n\u003cli\u003eFOX88406447, Kit: PVD, KOH Edition: 21-OnN Ford Bronco, 4 Door, w\/UCA, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 4 inch Lift, Sasquatch 3 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eFOX88406448, Kit: PVD, KOH Edition: 21-ON Ford Bronco, 4 Door, Rear Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 3 inch Lift, Sasquatch 2 inch, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684553134169,"sku":"BDS2500FPE","price":10855.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_ford_2500FPE_01.jpg?v=1758728465"},{"product_id":"2021-2025-bronco-3-4-lift-fox-3-0-frs-coilovers-hd-ucas-bds1905frs","title":"2021-2025 Bronco 3-4\" Lift FOX 3.0 FRS Coilovers HD UCAs (BDS1905FRS)","description":"\u003cp\u003eBDS Suspension's 3-4\" lift for 2021-2025 Ford Bronco 4-Door boosts stance, suspension travel, and capability while clearing larger tires. It runs FOX Factory Race Series 3.0 coil-over shocks front and rear with heavy-duty tubular upper control arms for added strength. The serviceable 3\" shocks feature a remote reservoir for cooling and a DSC adjuster with 10 low-speed and 12 high-speed compression settings, and the kit is covered by Factory Protection Plus.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance upper control arms increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eFOX Factory Race Series 3.0 coil-over shocks deliver on-road comfort and off-road capability\u003c\/li\u003e\n\u003cli\u003eShocks are fully serviceable and resistant to corrosion and harsh environments\u003c\/li\u003e\n\u003cli\u003eKit includes heavy duty tubular upper control arms for increased strength\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eCompatible with 2021-2025 Ford Bronco 4 Door models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684553789529,"sku":"BDS1905FRS","price":12377.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_ford__1904FRS_1905FRS_01.jpg?v=1758728550"},{"product_id":"2021-2025-bronco-3-4-lift-fox-factory-race-series-3-0-coilovers-bds2245frs","title":"2021-2025 Bronco 3-4\" Lift FOX Factory Race Series 3.0 Coilovers (BDS2245FRS)","description":"\u003cp\u003eExperience uncompromising off-road performance with BDS Suspension's FOX Factory Race Series 3.0 coilover system engineered for your Bronco 4-Door. This precision-tuned 3 to 4-inch lift delivers enhanced ground clearance and aggressive stance while accommodating up to 37-inch tires. Built around FOX's legendary 3.0 coil-over shocks and reinforced upper control arms, the kit maximizes suspension articulation and travel for serious terrain conquest. Purpose-built for durability and dynamic handling, this race-proven suspension transforms your Bronco's capability both on and off the pavement.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eEasy, 100% Bolt on installation\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.0\" impact extruded and CNC machined 6061-T6 hard-anodized aluminum body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePatented, internal bypass design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApplication-specific springs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e7\/8\" stainless steel shafts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVehicle-specific tuning maximizes performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRedundant sealing pack system: main seal, wiper seal, scraper seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinned reservoir, with DSC adjuster\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePosition- and velocity-sensitive damping maximize comfort and control through any terrain\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTune vehicle for load, environment, and driving style with DSC adjusters\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBall Joint Control Arm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eCompatibility Notes\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with Raptor Models.\u003c\/li\u003e\n\u003cli\u003eIs compatible with HOSS 3.0 Bronco Models\u003c\/li\u003e\n\u003cli\u003eLift height is based on base suspension package, Badlands and Sasquatch models will net less lift however final ride height is the same for all trims.\u003c\/li\u003e\n\u003cli\u003eDo NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use appropriate ball joint separation tool (OTC 204592).\u003c\/li\u003e\n\u003cli\u003eDoes not fit Bronco Sport models.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 Door | Without Sasquatch Package - 4.5\" Lift\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 Door | Without Sasquatch Package - 4\" Lift\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 Door | With Sasquatch Package - 3.5\" Lift\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 Door | With Sasquatch Package - 3\" Lift\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil-Over\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 2.5\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 3\"\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003cli\u003eLift Height : 2-3.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eTire Fitment\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 17 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 18 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 20 x 9 and 5.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684558049369,"sku":"BDS2245FRS","price":12028.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/BDS_ford_2245FRS.webp?v=1762370216"},{"product_id":"icon-2021-ford-bronco-3in-lift-c-o-spacer-kit","title":"2021-2026 Bronco 3\" Lift Coilover Spacer Kit (IVD4300)","description":"\u003cp\u003eLevel up your Bronco with the ICON Vehicle Dynamics 3 inch Lift Coilover Spacer Kit, engineered to deliver added ride height while preserving factory suspension geometry. Designed as a complete bolt-on solution, this kit provides a more aggressive stance, increased clearance, and long-term reliability for on-road and off-road driving.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 3 inches of front lift using coil spring preload spacers and top load shims\u003c\/li\u003e\n\u003cli\u003eDelivers 2 inches of rear lift on HOSS 2.0 equipped models\u003c\/li\u003e\n\u003cli\u003eProvides up to 2.75 inches of rear lift on HOSS 1.0 equipped models\u003c\/li\u003e\n\u003cli\u003eEngineered to prevent ball joint over extension and binding\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper front suspension geometry\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 billet aluminum construction for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish provides corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront lift height of 3 inches\u003c\/li\u003e\n\u003cli\u003eRear lift height varies by suspension package\u003c\/li\u003e\n\u003cli\u003eBillet aluminum spacer construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eCompatibility\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2021 and newer Ford Bronco\u003c\/li\u003e\n\u003cli\u003eCompatible with HOSS 1.0 and HOSS 2.0 suspension packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to retain factory ride quality and suspension integrity\u003c\/li\u003e\n\u003cli\u003eBacked by ICON Vehicle Dynamics limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":42991935357017,"sku":"IVD4300","price":632.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/5126d844733034729b15e7574f7ac1e4.jpg?v=1768603268"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40003","title":"2021-2026 Bronco Front and Rear Lift Kit (K40003)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door non-Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159877025881,"sku":"K40003","price":7087.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/9283e7fa6faf0818be976e613ad9b7ba.jpg?v=1773862684"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40003t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40003T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door non-Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159877222489,"sku":"K40003T","price":6280.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/98b85190944cf238043f0d897ea7b308.jpg?v=1773862685"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40004","title":"2021-2026 Bronco Front and Rear Lift Kit (K40004)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159877582937,"sku":"K40004","price":8487.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ff7760d8c39da084539b9f16db3c951f.jpg?v=1773862687"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40004t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40004T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159877746777,"sku":"K40004T","price":7680.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/de601c63ea76dc0eafdb3d29f33fab5f.jpg?v=1773862689"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40005","title":"2021-2026 Bronco Front and Rear Lift Kit (K40005)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eBillet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON billet aluminum rear lower suspension links. These links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. These billet links also feature on-vehicle length adjustment and replaceable rock skids. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159878500441,"sku":"K40005","price":10835.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/49fab398f3609a16ca6b20b9411e8891.jpg?v=1773862702"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40005t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40005T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eTubular rear lower links improve rear end articulation and allow for pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON tubular rear lower suspension links. These adjustable links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159878631513,"sku":"K40005T","price":8776.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/304945fc9263b6a260bd50e3f02454b2.jpg?v=1773862704"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40006","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40006)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON billet rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality while offering on-vehicle length adjustment. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159878762585,"sku":"K40006","price":11717.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/46385ee5453ca4b3484c21be59610410.jpg?v=1773862705"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40006t","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40006T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended+\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159878860889,"sku":"K40006T","price":9658.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/14e0bc1aabfa8ff82aa1a56bd032ca03.jpg?v=1773862707"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40007","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40007)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete billet rear link kit including upper links and ICON's tubular Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings, massive FK rod ends, and on-vehicle adjustability just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879024729,"sku":"K40007","price":13859.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/27cac5c1a61d570efa67608bdf4804ae.jpg?v=1773862709"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40007t","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40007T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete tubular rear link kit including upper links and ICON's Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879123033,"sku":"K40007T","price":11172.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/e21286dd614f3346e458fbd10a6f03ee.jpg?v=1773862711"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40008","title":"2021-2026 Bronco Front and Rear Lift Kit (K40008)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilover shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. The billet rear links have been designed to free up suspension bind, offer on-vehicle pinion angle adjustment, and optimize clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879286873,"sku":"K40008","price":16143.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/b362c1cad47d01776c010c1f27914ea1.jpg?v=1773862713"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40008t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40008T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilover shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. The tubular rear links links have been designed to free up suspension bind, offer pinion angle adjustment, and optimize clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879385177,"sku":"K40008T","price":13456.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/435c0014bbb60aaec5fa1f754aef932c.jpg?v=1773862714"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40013","title":"2021-2026 Bronco Front and Rear Lift Kit (K40013)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Sasquatch package equipped Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879581785,"sku":"K40013","price":7087.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/9283e7fa6faf0818be976e613ad9b7ba_35184e85-0ee1-4f3b-8b25-0f13d9f7e579.jpg?v=1773862716"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40013t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40013T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Sasquatch package equipped Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159879680089,"sku":"K40013T","price":6280.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/98b85190944cf238043f0d897ea7b308_d9e2c51f-fc92-4e00-8215-c6d5e6b1507d.jpg?v=1773862718"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40014","title":"2021-2026 Bronco Front and Rear Lift Kit (K40014)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Sasquatch package equipped Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880106073,"sku":"K40014","price":8487.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ff7760d8c39da084539b9f16db3c951f_7250771b-2f7c-4edd-b131-a339d064c135.jpg?v=1773862725"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40014t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40014T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Sasquatch package equipped Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880237145,"sku":"K40014T","price":7680.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/de601c63ea76dc0eafdb3d29f33fab5f_754fd6c9-0bdb-4c64-933d-c7e54ee5a775.jpg?v=1773862727"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40015","title":"2021-2026 Bronco Front and Rear Lift Kit (K40015)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos equipped with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eBillet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos equipped with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON billet aluminum rear lower suspension links. These links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. These billet links also feature on-vehicle length adjustment and replaceable rock skids. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880335449,"sku":"K40015","price":10835.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/49fab398f3609a16ca6b20b9411e8891_2f4273cc-ef37-4e21-94d0-8e93a6cc970f.jpg?v=1773862729"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40015t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40015T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eTubular rear lower links improve rear end articulation and allow for pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos equipped with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON tubular rear lower suspension links. These adjustable links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880466521,"sku":"K40015T","price":8776.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/304945fc9263b6a260bd50e3f02454b2_ce812a7d-6b63-43e1-bee2-a6bcf7cdb2a8.jpg?v=1773862731"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40016","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40016)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos equipped with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON billet rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality while offering on-vehicle length adjustment. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880597593,"sku":"K40016","price":11717.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/46385ee5453ca4b3484c21be59610410_fad8191f-77be-4470-87ac-181e00ed9e32.jpg?v=1773862733"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40016t","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40016T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos equipped with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880695897,"sku":"K40016T","price":9658.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/14e0bc1aabfa8ff82aa1a56bd032ca03_b441ca2e-ec41-4c33-b73a-2d54d97f0d6a.jpg?v=1773862734"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40017","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40017)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete billet rear link kit including upper links and ICON's tubular Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings, massive FK rod ends, and on-vehicle adjustability just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880826969,"sku":"K40017","price":13859.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/27cac5c1a61d570efa67608bdf4804ae_31ed3599-8b61-4efb-ac75-b446582f2d1d.jpg?v=1773862736"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40017t","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40017T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete tubular rear link kit including upper links and ICON's Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159880958041,"sku":"K40017T","price":11172.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/e21286dd614f3346e458fbd10a6f03ee_5b42580b-3ead-40c6-9938-98d4519083f3.jpg?v=1773862738"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40018","title":"2021-2026 Bronco Front and Rear Lift Kit (K40018)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. The billet rear links have been designed to free up suspension bind, offer on-vehicle pinion angle adjustment, and optimize clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. The rear CDEV coilover shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159881023577,"sku":"K40018","price":16143.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/b362c1cad47d01776c010c1f27914ea1_0cfb073c-81ef-44f0-bb60-0fa827c3e71c.jpg?v=1773862739"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40018t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40018T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Broncos with the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique triple rate rear coil design\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 8 also includes the complete tubular rear link kit including upper links and ICON's Adjustable Rear Track Bar. The rear links links have been designed to free up suspension bind, offer pinion angle adjustment, and optimize clearance from the fuel tank and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability. The rear CDEV coilover shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159881089113,"sku":"K40018T","price":13456.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/435c0014bbb60aaec5fa1f754aef932c_389d79c9-8f88-49f1-85fa-586393c02fa4.jpg?v=1773862741"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40001","title":"2021-2026 Bronco Front and Rear Lift Kit (K40001)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 1.375-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle specific design for 2021-2026 Ford Bronco with HOSS 1.0 Suspension Package\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned shocks for superior shock damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eKit includes full set of (4) 2.5 Aluminum Series EXP Shocks with Internal Reservoirs\u003c\/li\u003e\n  \u003cli\u003eAdjustable ride heights from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock with the use of snap rings\u003c\/li\u003e\n  \u003cli\u003eUtilizes factory coils and coil hardware\u003c\/li\u003e\n  \u003cli\u003eInverted shaft up design featuring 7\/8\" diameter, induction hardened, chrome plated shafts\u003c\/li\u003e\n  \u003cli\u003eOne-piece, impact extruded, hard anodized aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 aluminum components with a black anodized finish\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on - no cutting or welding necessary for installation\u003c\/li\u003e\n  \u003cli\u003eFully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eFactory UCA's will not align properly past 2\" of lift. Above 2\" of lift an aftermarket UCA is recommended.\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Bump Stop Spacer Kit Part #611082 In The Front\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eDue to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and\/or injury.\u003c\/li\u003e\n  \u003cli\u003eOnly fits Ford Bronco equipped with HOSS 1.0 Suspension Package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 Suspension System for the 2021-2026 Ford Bronco features front and rear 2.5 EXP Series coilovers to yield increased wheel travel along with superior ride quality and suspension performance both on and off-road. 2.5 EXP Series coilovers combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP coilovers use a series of snap-ring grooves machined into the shock body to provide easily-selectable ride height adjustment from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock on Bronco’s equipped with the OE HOSS 1.0 suspension package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7\/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON. HOSS 1.0 is Ford's \"base\" suspension system for Broncos with the Base, Big Bend, Outer Banks and Black Diamond trim levels WITHOUT the Sasquatch package. HOSS 1.0 is most easily identified by the BLACK shock bodies of the OE shocks.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159923982425,"sku":"K40001","price":3084.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/c220f86138523c1b0bf0882e0e11f823.jpg?v=1773863510"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40002","title":"2021-2026 Bronco Front and Rear Lift Kit (K40002)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 1.375-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle specific design for 2021-2026 Ford Bronco with HOSS 1.0 Suspension Package\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned shocks for superior shock damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eKit includes full set of (4) 2.5 Aluminum Series EXP Shocks with Internal Reservoirs\u003c\/li\u003e\n  \u003cli\u003eAdjustable ride heights from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock with the use of snap rings\u003c\/li\u003e\n  \u003cli\u003eUtilizes factory coils and coil hardware\u003c\/li\u003e\n  \u003cli\u003eInverted shaft up design featuring 7\/8\" diameter, induction hardened, chrome plated shafts\u003c\/li\u003e\n  \u003cli\u003eOne-piece, impact extruded, hard anodized aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 aluminum components with a black anodized finish\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on - no cutting or welding necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Bump Stop Spacer Kit Part #611082 In The Front\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eOnly fits Ford Bronco equipped with HOSS 1.0 Suspension Package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 Suspension System for the 2021-2026 Ford Bronco features front and rear 2.5 EXP Series coilovers to yield increased wheel travel along with superior ride quality and suspension performance both on and off-road. 2.5 EXP Series coilovers combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP coilovers use a series of snap-ring grooves machined into the shock body to provide easily-selectable easily-selectable ride height adjustment from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock on Bronco’s equipped with the OE HOSS 1.0 suspension package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7\/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON. To accommodate the increased lift height afforded by the ICON EXP front coilovers, this Stage 2 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. HOSS 1.0 is Ford's \"base\" suspension system for Broncos with the Base, Big Bend, Outer Banks and Black Diamond trim levels WITHOUT the Sasquatch package. HOSS 1.0 is most easily identified by the BLACK shock bodies of the OE shocks.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159924047961,"sku":"K40002","price":5158.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/0be364837571f48759ac39cdcd26eb47.jpg?v=1773863513"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40002t","title":"2021-2026 Bronco Front and Rear Lift Kit (K40002T)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 1.375-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle specific design for 2021-2026 Ford Bronco with HOSS 1.0 Suspension Package\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned shocks for superior shock damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eKit includes full set of (4) 2.5 Aluminum Series EXP Shocks with Internal Reservoirs\u003c\/li\u003e\n  \u003cli\u003eAdjustable ride heights from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock with the use of snap rings\u003c\/li\u003e\n  \u003cli\u003eUtilizes factory coils and coil hardware\u003c\/li\u003e\n  \u003cli\u003eInverted shaft up design featuring 7\/8\" diameter, induction hardened, chrome plated shafts\u003c\/li\u003e\n  \u003cli\u003eOne-piece, impact extruded, hard anodized aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 aluminum components with a black anodized finish\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on - no cutting or welding necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Bump Stop Spacer Kit Part #611082 In The Front\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eOnly fits Ford Bronco equipped with HOSS 1.0 Suspension Package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 Suspension System for the 2021-2026 Ford Bronco features front and rear 2.5 EXP Series coilovers to yield increased wheel travel along with superior ride quality and suspension performance both on and off-road. 2.5 EXP Series coilovers combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP coilovers use a series of snap-ring grooves machined into the shock body to provide easily-selectable ride height adjustment from 1.375-3\" of front lift and 1.5-2.25\" of rear lift over stock on Bronco’s equipped with the OE HOSS 1.0 suspension package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7\/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON. To accommodate the increased lift height afforded by the ICON EXP front coilovers, this Stage 2 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. HOSS 1.0 is Ford's \"base\" suspension system for Broncos with the Base, Big Bend, Outer Banks and Black Diamond trim levels WITHOUT the Sasquatch package. HOSS 1.0 is most easily identified by the BLACK shock bodies of the OE shocks.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159924375641,"sku":"K40002T","price":4351.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/dcab6db65bf7d0b7e3ee7e9db2821ab7.jpg?v=1773863518"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40003tx","title":"2021-2026 Bronco Front and Rear Lift Kit (K40003TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door non-Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159943544921,"sku":"K40003TX","price":6430.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/98b85190944cf238043f0d897ea7b308_1227f1e1-0174-4f18-bb0b-ee0923cefaa3.jpg?v=1773863873"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40003x","title":"2021-2026 Bronco Front and Rear Lift Kit (K40003X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door non-Sasquatch Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944036441,"sku":"K40003X","price":7237.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/9283e7fa6faf0818be976e613ad9b7ba_3d31a345-af9b-4e23-8d17-d17a6fde364d.jpg?v=1773863875"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40004tx","title":"2021-2026 Bronco Front and Rear Lift Kit (K40004TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944134745,"sku":"K40004TX","price":7830.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/de601c63ea76dc0eafdb3d29f33fab5f_fef3fa10-f3cf-4a26-8f49-6955f9a7130e.jpg?v=1773863877"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40004x","title":"2021-2026 Bronco Front and Rear Lift Kit (K40004X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running Factory Lower Links Use Part #611072\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. To provide for sustained shock performance at speed through rough terrain, Stage 4 adds remote reservoirs to the ICON Coilovers. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 4 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944265817,"sku":"K40004X","price":8636.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ff7760d8c39da084539b9f16db3c951f_7035d601-43ef-474c-88b9-1fbce2fdc4a7.jpg?v=1773863879"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40005tx","title":"2021-2026 Bronco Front and Rear Lift Kit (K40005TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eTubular rear lower links improve rear end articulation and allow for pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON tubular rear lower suspension links. These adjustable links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944364121,"sku":"K40005TX","price":8926.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/304945fc9263b6a260bd50e3f02454b2_1e503f23-e42e-4b50-9e47-62fa7615f741.jpg?v=1773863881"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40005x","title":"2021-2026 Bronco Front and Rear Lift Kit (K40005X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003eBillet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 5 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 5 begins to free up the Bronco's rear suspension articulation while gaining strength and ground clearance with the addition of ICON billet aluminum rear lower suspension links. These links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. These billet links also feature on-vehicle length adjustment and replaceable rock skids. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944462425,"sku":"K40005X","price":10985.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/49fab398f3609a16ca6b20b9411e8891_90615a25-0101-443f-91ff-261ae274338b.jpg?v=1773863882"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40006tx","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40006TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944560729,"sku":"K40006TX","price":9806.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/14e0bc1aabfa8ff82aa1a56bd032ca03_3ba19f5b-50b9-4603-a9e2-e94cc5e873df.jpg?v=1773863884"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40006x","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40006X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. Stage 6 also features ICON's exclusive Compression Damping Control Valves for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 6 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. ICON billet rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation and ride quality while offering on-vehicle length adjustment. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159944659033,"sku":"K40006X","price":11865.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/46385ee5453ca4b3484c21be59610410_fff208fa-06cf-4e72-85f4-3f3607291bd9.jpg?v=1773863886"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40007tx","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40007TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete tubular rear link kit including upper links and ICON's Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159945183321,"sku":"K40007TX","price":11321.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/e21286dd614f3346e458fbd10a6f03ee_c3386445-b8c4-4527-bf75-f9e679a93515.jpg?v=1773863894"},{"product_id":"2021-2026-bronco-icon-cdcv-front-and-rear-lift-kit-k40007x","title":"2021-2026 Bronco CDCV Front and Rear Lift Kit (K40007X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eCoilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete billet rear link kit including upper links and ICON's tubular Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings, massive FK rod ends, and on-vehicle adjustability just like the lower links. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159945281625,"sku":"K40007X","price":14007.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/27cac5c1a61d570efa67608bdf4804ae_8d2ad853-9931-4cfc-a9a2-a7defde7e154.jpg?v=1773863895"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40008tx","title":"2021-2026 Bronco Front and Rear Lift Kit (K40008TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eWhen Running ICON Tubular Lower Links Use Part #611073\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. The tubular rear links links have been designed to free up suspension bind, offer pinion angle adjustment, and optimize clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159945347161,"sku":"K40008TX","price":13606.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/435c0014bbb60aaec5fa1f754aef932c_727f916f-99ef-4710-bac7-2d03fbdf5dfc.jpg?v=1773863897"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40008x","title":"2021-2026 Bronco Front and Rear Lift Kit (K40008X)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 3-4\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use\u003c\/li\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 3-4\" of front lift height and 2-3\" of rear lift height over stock 4-door Broncos without the Sasquatch package\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" with 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (Recommend high clearance crash bars part number 42000, 37\" tires require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based Non-Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eRecommend High Clearance Crash Bars Part #42000 On Non-Sasquatch Equipped Vehicles When Running 35\" Tires\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Crash Bar Removal May Be Required But Is Not Recommended\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eRear reservoir brackets may interfere with some aftermarket step or rock slider mounts. Modifications may be required.\u003c\/li\u003e\n  \u003cli\u003eAn iOS operated device is required to run ICON Intelligent Control app\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 3-4\" of front lift and 2-3\" of rear lift over stock 4-door Broncos without the Sasquatch Package. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. ICON's Top of The Range suspension system features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 kit comes with Billet Aluminum Upper Control Arms which provide on-vehicle caster and camber adjustability and feature our patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. The billet rear links have been designed to free up suspension bind, offer on-vehicle pinion angle adjustment, and optimize clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends. The Adjustable Track Bar also features our dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35\" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159945445465,"sku":"K40008X","price":16293.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/b362c1cad47d01776c010c1f27914ea1_daff3686-6ef8-4d13-ad47-2339a9ea6171.jpg?v=1773863899"},{"product_id":"2021-2026-bronco-icon-front-and-rear-lift-kit-k40013tx","title":"2021-2026 Bronco Front and Rear Lift Kit (K40013TX)","description":"\u003cp\u003eLevel up your 2021-2026 Bronco with this complete ICON suspension system. 2-3\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved suspension performance and ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eUp to 11.5\" front \/ 14\" rear wheel travel with 35\" tire fitment\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield up to 2-3\" of front lift height and 1.25-2.25\" of rear lift height over stock 4-door Sasquatch package equipped Broncos\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" diameter shafts\u003c\/li\u003e\n  \u003cli\u003eICON engineered coil springs featuring a unique dual rate rear coil design with increased spring rates for heavier equipped Broncos\u003c\/li\u003e\n  \u003cli\u003eHigh strength alloy CNC machined lower bar pins\u003c\/li\u003e\n  \u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n  \u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting, or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" tires require coilover bump stop spacers along with minor trimming)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eWill not fit Bronco Raptor\u003c\/li\u003e\n  \u003cli\u003e2 Door Models Will Sit Taller Than 4 Door Models.\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611075 In The Front\u003c\/li\u003e\n  \u003cli\u003eWhen Running 37\" Tires Use Up Travel Limiters Part #611074 For The Rear\u003c\/li\u003e\n  \u003cli\u003eLift Heights \u0026amp; App Notes Based On Sasquatch Equipped Vehicles\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eFitment testing done with ICON \u0026amp; OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.\u003c\/li\u003e\n  \u003cli\u003eBronco Everglades will have front lift height range of 1.5-2.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eICON Heavy Rate Rear Coil Springs are optimized for increased rear ride height on Broncos with additional weight added to the rear. ICON Heavy Rate Rear Coil Springs will result in a slight positive rake when the Bronco is unloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 Suspension System for the 2021-2026 Ford Bronco features our precision-manufactured, custom valved internal reservoir coilover shocks to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3\" of front lift and 1.25-2.25\" of rear lift over stock 4-door Broncos with the Sasquatch Package. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 3 kit comes with Tubular Upper Control Arms which provide caster correction and feature our patented Delta Joint PRO, which allows for up to 90-desgrees freedom of movement. The rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive dual rate coil springs that provide extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. This suspension system is designed to provide up to 11.5\" of front suspension travel and 14\" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37\" and larger tires if using the optional up-travel limiters (sold separately).\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159945511001,"sku":"K40013TX","price":6430.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/98b85190944cf238043f0d897ea7b308_305a9f97-e381-428a-8152-b087fc56c0ef.jpg?v=1773863900"}],"url":"https:\/\/dirtygarage.com\/collections\/2021-bronco-2-4-inch-lift-kits.oembed?page=4","provider":"Dirty Garage","version":"1.0","type":"link"}