{"title":"Maxtrax","description":"\u003cp\u003eShop \u003cstrong\u003eMaxtrax\u003c\/strong\u003e at Dirty Garage for \u003cstrong\u003eMKII and XTREME recovery boards in several finishes, plus mounting pins, MAXLOX locks, kinetic ropes and soft shackles.\u003c\/strong\u003e Maxtrax recovery boards give your tires grip to drive out of sand, mud and snow.\u003c\/p\u003e","products":[{"product_id":"maxtrax-mtx02bk","title":"MKII Recovery Boards Pair Black (MTX02BK)","description":"\u003cp\u003eA pair of MKII recovery boards in Black, the classic full size traction board for getting a stuck truck moving again in mud, sand or snow. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.8 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.4 x 13.4 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47704820777049,"sku":"MTX02BK","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_e25f6fd0-4ba7-45a4-b21e-0870406a0e36.png?v=1793592422"},{"product_id":"maxtrax-mtx02by","title":"MKII Recovery Boards Pair Blaze Yellow (MTX02BY)","description":"\u003cp\u003eBlaze Yellow MKII recovery boards are the high visibility pick: a full size pair that is easy to spot in a snowbank or a muddy rut. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Blaze Yellow\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.8 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.4 x 13.5 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706676985945,"sku":"MTX02BY","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_cca89beb-ed23-466b-b2d3-be06fb74a811.png?v=1793596384"},{"product_id":"maxtrax-mtx02dt","title":"MKII Recovery Boards Pair Desert Tan (MTX02DT)","description":"\u003cp\u003eThis Desert Tan pair of MKII recovery boards blends into an overland build while giving the tires a firm, toothy base to climb out on. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Desert Tan\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.9 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.3 x 13.6 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677084249,"sku":"MTX02DT","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_0f358ccb-724f-4241-8e20-417d3dbfbfe5.png?v=1793596387"},{"product_id":"maxtrax-mtx02fjb","title":"MKII Recovery Boards Pair FJ Blue (MTX02FJB)","description":"\u003cp\u003eFJ Blue MKII recovery boards bring a splash of colour to the roof rack and a proven way out when the truck digs itself in. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: FJ Blue\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.7 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.4 x 13.4 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677149785,"sku":"MTX02FJB","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_9e8090e3-6d2b-49e3-bf88-5de7cadd21e3.png?v=1793596390"},{"product_id":"maxtrax-mtx02fjr","title":"MKII Recovery Boards Pair FJ Red (MTX02FJR)","description":"\u003cp\u003eThe FJ Red pair of MKII recovery boards is bright, tough and simple to use: wedge one under the spinning tire and drive out. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: FJ Red\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.0 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.3 x 13.3 x 3.9 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677280857,"sku":"MTX02FJR","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_d97d1a8a-6167-43c6-9d76-bfed07310945.png?v=1793596393"},{"product_id":"maxtrax-mtx02gg","title":"MKII Recovery Boards Pair Gunmetal Grey (MTX02GG)","description":"\u003cp\u003eGunmetal Grey MKII recovery boards suit a stealthier build without giving up any of the traction that made the MKII the standard. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Sold as a pair.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Gunmetal Grey\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.5 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.3 x 13.6 x 3.9 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677379161,"sku":"MTX02GG","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_9ac68964-7dd9-4665-b956-7c57eb91d999.png?v=1793596396"},{"product_id":"maxtrax-mtx02lg","title":"MKII Recovery Boards Pair Lime Green (MTX02LG)","description":"\u003cp\u003eLime Green MKII recovery boards are impossible to lose in the bush and just as hard to break under a loaded 4WD. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Lime Green\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.2 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 46.85 x 13.78 x 3.74 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677444697,"sku":"MTX02LG","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_42eb6be0-8735-4755-b8c7-32c8dd93e963.png?v=1793596400"},{"product_id":"maxtrax-mtx02od","title":"MKII Recovery Boards Pair Olive Drab (MTX02OD)","description":"\u003cp\u003eAn Olive Drab pair of MKII recovery boards for the expedition rig that keeps its gear low key and its recoveries quick. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Olive Drab\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 16.0 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.6 x 13.6 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677575769,"sku":"MTX02OD","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_e15b5663-34f4-4a13-baf0-e034b9213f16.png?v=1793596403"},{"product_id":"maxtrax-mtx02pk","title":"MKII Recovery Boards Pair Pink (MTX02PK)","description":"\u003cp\u003ePink MKII recovery boards add a bit of sparkle to a recovery while doing the same serious work as every other colour in the range. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Pink\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.2 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 46.85 x 13.78 x 3.74 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThis Pink is a newer shade and will not colour match Pink boards bought before May 2020.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677674073,"sku":"MTX02PK","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_6b972c59-2c61-4a38-a30c-beb86007796f.png?v=1793596406"},{"product_id":"maxtrax-mtx02so","title":"MKII Recovery Boards Pair Signature Orange (MTX02SO)","description":"\u003cp\u003eThe Signature Orange pair is the original look of the MKII recovery board, bright enough to find in a bog and tough enough to haul a loaded truck out of it. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Signature Orange\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.3 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.2 x 13.4 x 3.9 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677739609,"sku":"MTX02SO","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_5e374fb2-18f9-450c-98cc-f2d54a36ea30.png?v=1793596409"},{"product_id":"maxtrax-mtx02tg","title":"MKII Recovery Boards Pair Titanium Grey (MTX02TG)","description":"\u003cp\u003eTitanium Grey MKII recovery boards pair a muted finish with the aggressive cleats and shovel ends that make the MKII a recovery staple. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Two boards and two orange telltale leashes come in the carton.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Titanium Grey\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton with 2 orange telltale leashes\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.3 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.8 x 13.5 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677837913,"sku":"MTX02TG","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_9533a91b-10f1-4ddf-a7d2-47b73229ceca.png?v=1793596412"},{"product_id":"maxtrax-mtx02tq","title":"MKII Recovery Boards Pair Turquoise (MTX02TQ)","description":"\u003cp\u003eTurquoise MKII recovery boards stand out on a rack and dig in under the tire when the trail turns to soup. Each board is moulded from UV stabilised reinforced nylon, weighs just 3.4 kg (7.5 lb) and nests with its partner into an 85 mm (3.5 in) stack for easy stowing. Sold as a pair.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge aggressive cleats bite into the tire tread and the ground at the same time so the truck climbs out instead of sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eMoulded from UV stabilised, flexible, engineering grade reinforced nylon that stays firm under the tire\u003c\/li\u003e\n\u003cli\u003eTested to wrap all the way around a 33 in tire without cracking\u003c\/li\u003e\n\u003cli\u003eShovel shaped ends on each board clear loose material from in front of the tire before the pull\u003c\/li\u003e\n\u003cli\u003eSix comfortable moulded handles make positioning fast, even with gloves on\u003c\/li\u003e\n\u003cli\u003eDouble edged shape so a board can be slid under the tire from either side\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting on pins and brackets\u003c\/li\u003e\n\u003cli\u003eEach board weighs 3.4 kg (7.5 lb) and a nested pair stacks only 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003cli\u003eMade in Australia and backed by a limited lifetime warranty against faulty materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Turquoise\u003c\/li\u003e\n\u003cli\u003eBoard size: 1150 mm long x 330 mm wide x 85 mm tall (45 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.4 kg (7.5 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards per carton\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 17.16 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 46.85 x 13.78 x 3.74 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706677968985,"sku":"MTX02TQ","price":403.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTX02TQ.full_cf61d1f9-05a3-41ac-8181-39a356fe2aae.png?v=1793596416"},{"product_id":"maxtrax-mtxcs","title":"Core Shackle Soft Shackle 30864 lb MBS (MTXCS)","description":"\u003cp\u003eThe Core Shackle is the heavy soft shackle in the recovery system, rated to a minimum breaking strength of 14000 kg (30864 lb) and designed to sit at the core of two interacting pieces of gear, such as a kinetic rope and the Winch Ring 120. It is spliced from ultra high molecular weight polyethylene with a polyester cover, weighs only 180 g and measures 550 mm long. The loop and knot design slips over a rope eye, a hitch or a rated recovery point in seconds with no metal hardware in the line.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMinimum breaking strength of 14000 kg (30864 lb)\u003c\/li\u003e\n\u003cli\u003eIntended as the connector between two system components, and specifically for use with the Winch Ring 120\u003c\/li\u003e\n\u003cli\u003eUltra high molecular weight polyethylene rope with a polyester cover, 180 g, no metal parts to fly if something lets go\u003c\/li\u003e\n\u003cli\u003eLoop over knot closure: loosen the loop, pass it through the hitch, rope eye or recovery point, slide it back over the knot and pull both sides to tighten\u003c\/li\u003e\n\u003cli\u003ePosition the knot so the loop pulls at 90 degrees beside it\u003c\/li\u003e\n\u003cli\u003eWorks with the kinetic rope, static rope, winch rope, hitch and winch ring in the same system\u003c\/li\u003e\n\u003cli\u003eRinse in fresh water and air dry after use; store in the recovery kit bag\u003c\/li\u003e\n\u003cli\u003eReplacement protective sheaths available from the maker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaterial: ultra high molecular weight polyethylene and polyester\u003c\/li\u003e\n\u003cli\u003eWeight: 180 g\u003c\/li\u003e\n\u003cli\u003eLength: 550 mm\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength: 14000 kg (30864 lb)\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 1.1 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 10.0 x 8.0 x 2.0 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaxtrax designs and tests this as part of its own recovery system, and states that a Fuse Shackle must be used in the system during every recovery.\u003c\/li\u003e\n\u003cli\u003eConnect only to rated recovery points.\u003c\/li\u003e\n\u003cli\u003eInspect before every use. Do not use it if it is cut, frayed, burned, melted or abraded, or if the warning label is not legible.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the Winch Ring 120.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678034521,"sku":"MTXCS","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXCS.full_f64c074b-86be-4d88-a551-79ee0f7a6773.png?v=1793596419"},{"product_id":"maxtrax-mtxfs","title":"Fuse Shackle Soft Shackle 15432 lb MBS (MTXFS)","description":"\u003cp\u003eThe Fuse Shackle is the deliberate weak link of the recovery system: a soft shackle with a minimum breaking strength of 7000 kg (15432 lb) that is designed to be the first thing to let go if a pull is overloaded, so the rope, ring and recovery points survive. The maker requires one in the system on every recovery. It is spliced from ultra high molecular weight polyethylene with a polyester cover, weighs 120 g and measures 550 mm long, with a loop and knot closure that takes seconds to fit.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMinimum breaking strength of 7000 kg (15432 lb), set below the rest of the system so it fails first under overload\u003c\/li\u003e\n\u003cli\u003eRequired by the maker in the system during every vehicle recovery\u003c\/li\u003e\n\u003cli\u003eUltra high molecular weight polyethylene rope with a polyester cover, 120 g, no metal in the line\u003c\/li\u003e\n\u003cli\u003eLoop over knot closure: loosen the loop, pass it through the hitch, rope eye or recovery point, slide it back over the knot and pull both sides to tighten\u003c\/li\u003e\n\u003cli\u003ePosition the knot so the loop pulls at 90 degrees beside it\u003c\/li\u003e\n\u003cli\u003eConnects the kinetic rope, static rope, winch rope or hitch to a rated recovery point\u003c\/li\u003e\n\u003cli\u003eRinse in fresh water and air dry after use; store in the recovery kit bag\u003c\/li\u003e\n\u003cli\u003eReplacement protective sheaths available from the maker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaterial: ultra high molecular weight polyethylene and polyester\u003c\/li\u003e\n\u003cli\u003eWeight: 120 g\u003c\/li\u003e\n\u003cli\u003eLength: 550 mm\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength: 7000 kg (15432 lb)\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 1.1 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 10.63 x 7.87 x 1.97 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaxtrax designs and tests this as part of its own recovery system, and states that a Fuse Shackle must be used in the system during every recovery.\u003c\/li\u003e\n\u003cli\u003eConnect only to rated recovery points.\u003c\/li\u003e\n\u003cli\u003eInspect before every use. Do not use it if it is cut, frayed, burned, melted or abraded, or if the warning label is not legible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678132825,"sku":"MTXFS","price":50.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXFS.full_95fbee9c-075c-4254-bf8d-dab90c94db20.png?v=1793596422"},{"product_id":"maxtrax-mtxkr3","title":"3 m x 24 mm Kinetic Rope (MTXKR3)","description":"\u003cp\u003eA 3 m kinetic recovery rope, 24 mm thick and 1.8 kg, that stretches up to 30 percent to build a smooth, progressive pull instead of the jolt of a flat snatch strap. Minimum breaking strength is 12000 kg (26455 lb). The short length suits a tight recovery or doubles as an extension: two or more ropes join end to end with Core Shackles to reach the length the recovery needs.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUp to 30 percent elongation stores energy for a smoother, safer pull than a flat snatch strap\u003c\/li\u003e\n\u003cli\u003eNylon 66 rope with a polyester cover, 24 mm diameter\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength of 12000 kg (26455 lb)\u003c\/li\u003e\n\u003cli\u003eConnects to a hitch, another kinetic rope, a static rope or a rated recovery point with a Core Shackle or Fuse Shackle\u003c\/li\u003e\n\u003cli\u003eSeveral ropes link end to end to make up the length a particular recovery needs\u003c\/li\u003e\n\u003cli\u003eStrength and stretch drop when the rope is soaked, so rinse it in fresh water and air dry it after use\u003c\/li\u003e\n\u003cli\u003eStore in the recovery kit bag out of the sun; replacement protective sheaths are available\u003c\/li\u003e\n\u003cli\u003eInspect for cuts, fraying, burns and abrasion before every pull\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLength: 3 m\u003c\/li\u003e\n\u003cli\u003eDiameter: 24 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.8 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: nylon 66 and polyester\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength: 12000 kg (26455 lb)\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 2.21 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 16.93 x 7.09 x 4.72 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaxtrax designs and tests this as part of its own recovery system, and states that a Fuse Shackle must be used in the system during every recovery.\u003c\/li\u003e\n\u003cli\u003eConnect only to rated recovery points.\u003c\/li\u003e\n\u003cli\u003eInspect before every use. Do not use it if it is cut, frayed, burned, melted or abraded, or if the warning label is not legible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678231129,"sku":"MTXKR3","price":158.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_7e6e4c0d-2452-43fb-93cc-c4ca4bfb5267.png?v=1793596424"},{"product_id":"maxtrax-mtxkr5","title":"5 m x 24 mm Kinetic Rope (MTXKR5)","description":"\u003cp\u003eThe 5 m kinetic recovery rope is the mid length in the range, 24 mm thick and 2.5 kg, stretching up to 30 percent so the pull builds smoothly instead of shock loading the recovery points. Minimum breaking strength is 12000 kg (26455 lb). Ropes can be run alone or joined with Core Shackles when a longer run is needed.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUp to 30 percent elongation stores energy for a smoother, safer pull than a flat snatch strap\u003c\/li\u003e\n\u003cli\u003eNylon 66 rope with a polyester cover, 24 mm diameter\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength of 12000 kg (26455 lb)\u003c\/li\u003e\n\u003cli\u003eConnects to a hitch, another kinetic rope, a static rope or a rated recovery point with a Core Shackle or Fuse Shackle\u003c\/li\u003e\n\u003cli\u003eSeveral ropes link end to end to make up the length a particular recovery needs\u003c\/li\u003e\n\u003cli\u003eStrength and stretch drop when the rope is soaked, so rinse it in fresh water and air dry it after use\u003c\/li\u003e\n\u003cli\u003eStore in the recovery kit bag out of the sun; replacement protective sheaths are available\u003c\/li\u003e\n\u003cli\u003eInspect for cuts, fraying, burns and abrasion before every pull\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLength: 5 m\u003c\/li\u003e\n\u003cli\u003eDiameter: 24 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: nylon 66 and polyester\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength: 12000 kg (26455 lb)\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 4.41 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 19.68 x 7.87 x 5.91 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaxtrax designs and tests this as part of its own recovery system, and states that a Fuse Shackle must be used in the system during every recovery.\u003c\/li\u003e\n\u003cli\u003eConnect only to rated recovery points.\u003c\/li\u003e\n\u003cli\u003eInspect before every use. Do not use it if it is cut, frayed, burned, melted or abraded, or if the warning label is not legible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678296665,"sku":"MTXKR5","price":201.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_b9c4dcc1-59fa-4490-80b5-82f191d423be.png?v=1793596426"},{"product_id":"maxtrax-mtxltbk","title":"LITE Recovery Boards Pair Black (MTXLTBK)","description":"\u003cp\u003eBlack LITE recovery boards are the lightweight take on the full size traction board: 3.9 lb per board, 48 percent lighter than an MKII, with a 35 in footprint that still carries plenty of teeth. They are moulded in Australia from an impact resistant thermoplastic, keep the shovel ends and mounting pin holes of the bigger boards, and link to any other board in the family.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHalf the weight of a full size board at 3.9 lb each, 48 percent lighter than an MKII\u003c\/li\u003e\n\u003cli\u003e35 in long footprint gives a compact board that still digs in under the tire\u003c\/li\u003e\n\u003cli\u003e66 aggressive teeth grip the tread quickly and hold it\u003c\/li\u003e\n\u003cli\u003eShovel at both ends for digging out in tight spots\u003c\/li\u003e\n\u003cli\u003eFour comfortable handles sized for the shorter board\u003c\/li\u003e\n\u003cli\u003eMounting pin holes for tidy storage and for linking LITE boards together or to the other boards in the family\u003c\/li\u003e\n\u003cli\u003eImpact resistant thermoplastic construction keeps the weight down without going soft\u003c\/li\u003e\n\u003cli\u003eMade in Australia and covered by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eLength: 35 in\u003c\/li\u003e\n\u003cli\u003eWeight per board: 3.9 lb\u003c\/li\u003e\n\u003cli\u003eTeeth: 66 per board\u003c\/li\u003e\n\u003cli\u003eMaterial: impact resistant thermoplastic\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 9.2 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 36.1 x 13.3 x 4.0 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678329433,"sku":"MTXLTBK","price":244.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MAXTRAX-lite_1e951439-ac3b-4d7f-bbf4-37d6a3c111ee.png?v=1793596427"},{"product_id":"maxtrax-mtxml30","title":"MAXLOX 30 mm Stainless Steel Padlock with Silicone Cover (MTXML30)","description":"\u003cp\u003eThe MAXLOX is a 30 mm heavy duty stainless steel padlock with a silicone cover, made to secure a set of recovery boards against theft when they are mounted on the mounting pins. The shank slips through the lock hole drilled in a mounting pin shaft; snap it shut and the boards stay put.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30 mm heavy duty stainless steel padlock body\u003c\/li\u003e\n\u003cli\u003eSilicone cover over the lock body\u003c\/li\u003e\n\u003cli\u003eShank slips through the lock hole drilled in a mounting pin shaft\u003c\/li\u003e\n\u003cli\u003eLocks a stack of recovery boards to the rack when they are mounted on the pins\u003c\/li\u003e\n\u003cli\u003eTurn every mounting pin to its lock position and fit the padlock through at least one pin shaft when travelling\u003c\/li\u003e\n\u003cli\u003eWorks with the mounting pin range for MKII, XTREME, LITE and Mini boards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSize: 30 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eCover: silicone\u003c\/li\u003e\n\u003cli\u003eQuantity: 1\u003c\/li\u003e\n\u003cli\u003eWeight: 140 g (0.31 lb)\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 6.69 x 3.54 x 1.97 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678460505,"sku":"MTXML30","price":35.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXML30.full_39cc9fa7-e62f-44eb-a87d-3e2d5b8012c5.png?v=1793596429"},{"product_id":"maxtrax-mtxml30d","title":"MAXLOX 30 mm Stainless Steel Padlock with Silicone Cover 2 Pack (MTXML30D)","description":"\u003cp\u003eTwo MAXLOX padlocks in one pack, so both mounting pins on a board stack can be locked. Each is a 30 mm heavy duty stainless steel padlock wrapped in a silicone cover, sized to slip through the lock hole drilled in a mounting pin shaft and keep a set of recovery boards on the rack when the truck is parked.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo padlocks in the pack, one for each pin on a mounted stack\u003c\/li\u003e\n\u003cli\u003e30 mm heavy duty stainless steel padlock body\u003c\/li\u003e\n\u003cli\u003eSilicone cover over the lock body\u003c\/li\u003e\n\u003cli\u003eShank slips through the lock hole drilled in a mounting pin shaft\u003c\/li\u003e\n\u003cli\u003eLocks a stack of recovery boards to the rack when they are mounted on the pins\u003c\/li\u003e\n\u003cli\u003eTurn every mounting pin to its lock position and fit the padlock through at least one pin shaft when travelling\u003c\/li\u003e\n\u003cli\u003eWorks with the mounting pin range for MKII, XTREME, LITE and Mini boards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSize: 30 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eCover: silicone\u003c\/li\u003e\n\u003cli\u003eQuantity: 2\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 1.1 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 19.68 x 4.33 x 1.18 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678493273,"sku":"MTXML30D","price":64.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_b13f5ce6-1fc8-423f-baf9-e4176b656c2d.png?v=1793596431"},{"product_id":"maxtrax-mtxmp","title":"Mini Recovery Boards Pair Signature Orange (MTXMP)","description":"\u003cp\u003eA Signature Orange pair of Mini recovery boards, the short 640 mm (25 in) version of the full size board for ATVs, UTVs, SUVs and any rig short on cargo space. Each Mini is moulded from the same UV stabilised engineering grade reinforced nylon as the MKII, weighs about 2 kg (4.4 lb) and still carries shovel ends, two handles and keyhole accessory points. With the Fixing and Linking Kit a Mini joins end to end with any other board in the range to stretch the track.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompact 640 mm x 330 mm x 85 mm (25 in x 13 in x 3.5 in) board sized for smaller vehicles and tight cargo areas\u003c\/li\u003e\n\u003cli\u003eSame UV stabilised engineering grade reinforced nylon as the full size MKII\u003c\/li\u003e\n\u003cli\u003eAggressive cleats bite into the tread and the ground to stop an ATV, UTV, SUV or 4WD sliding back into mud, snow or sand\u003c\/li\u003e\n\u003cli\u003eAbout 2 kg (4.4 lb) per board, easy to carry and slide under a tire\u003c\/li\u003e\n\u003cli\u003eDouble edged design so either side goes under the tire\u003c\/li\u003e\n\u003cli\u003eTwo comfortable built-in handles and a shovel at each end\u003c\/li\u003e\n\u003cli\u003eKeyhole accessory points for secure mounting\u003c\/li\u003e\n\u003cli\u003eJoins to other boards in the range with the Fixing and Linking Kit to extend the track\u003c\/li\u003e\n\u003cli\u003eA pair nests to just 85 mm (3.5 in) tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Signature Orange\u003c\/li\u003e\n\u003cli\u003eBoard size: 640 mm long x 330 mm wide x 85 mm tall (25 in x 13 in x 3.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight per board: approximately 2 kg (4.4 lb)\u003c\/li\u003e\n\u003cli\u003eMaterial: UV stabilised engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 9.26 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 27.17 x 13.58 x 3.74 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706678624345,"sku":"MTXMP","price":302.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_70d1f56f-ebfd-4d44-870d-28d1e679a1ed.png?v=1793596433"},{"product_id":"maxtrax-mtxswr","title":"30 m x 10 mm Static Winch Rope (MTXSWR)","description":"\u003cp\u003eA metal free 30 m synthetic winch rope, 10 mm thick, built as a safer replacement for steel cable or for synthetic lines fitted with a metal hook or thimble. The ultra high molecular weight polyethylene line weighs 2.5 kg, carries a minimum breaking strength of 9500 kg (20943 lb), and can come off the drum to serve as a static extension rope. Coloured safety markings woven into the rope show when the drum is nearly empty.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNo metal anywhere in the line: a spliced loop at the working end replaces the hook and thimble\u003c\/li\u003e\n\u003cli\u003eUltra high molecular weight polyethylene rope with a polyester cover, 10 mm x 30 m, 2.5 kg\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength of 9500 kg (20943 lb)\u003c\/li\u003e\n\u003cli\u003eDoubles as a static extension rope when removed from the winch drum\u003c\/li\u003e\n\u003cli\u003eBuilt-in coloured safety markings: black for the last 6 m, red for the last 2 m\u003c\/li\u003e\n\u003cli\u003eThe drum end carries the coloured marking so the rope goes on the winch the right way round\u003c\/li\u003e\n\u003cli\u003eLinks to a hitch, static rope or rated recovery point with a Core Shackle or Fuse Shackle, and joins other winch or static ropes for longer pulls\u003c\/li\u003e\n\u003cli\u003eUse with the Winch Ring for a double line or angled pull and the Winch Widget to seat the loop against the fairlead\u003c\/li\u003e\n\u003cli\u003eRinse in fresh water, air dry and store in the recovery kit bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLength: 30 m\u003c\/li\u003e\n\u003cli\u003eDiameter: 10 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: ultra high molecular weight polyethylene and polyester\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength: 9500 kg (20943 lb)\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 4.41 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 20.87 x 7.87 x 5.91 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eNotes\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMaxtrax designs and tests this as part of its own recovery system, and states that a Fuse Shackle must be used in the system during every recovery.\u003c\/li\u003e\n\u003cli\u003eConnect only to rated recovery points.\u003c\/li\u003e\n\u003cli\u003eInspect before every use. Do not use it if it is cut, frayed, burned, melted or abraded, or if the warning label is not legible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679148633,"sku":"MTXSWR","price":359.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXSWR.full_95e05b1c-1414-43d1-89cb-af57fd532251.png?v=1793596459"},{"product_id":"maxtrax-mtxump17","title":"Universal Mounting Pins Long up to 4 Boards 17 mm Thread (MTXUMP17)","description":"\u003cp\u003eLong universal mounting pins with the 17 mm thread, the version made for the flat mounting brackets. The long pin carries anywhere from two to four boards in any mix of MKII, LITE and XTREME, stacked securely on the rack yet quick to pull off when a tire is spinning. The same pins also hold the Mini and Motoboard.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLong pins carry from two up to four boards on one mount\u003c\/li\u003e\n\u003cli\u003eMix and match MKII, LITE and XTREME boards in the same stack\u003c\/li\u003e\n\u003cli\u003eAlso carries the Mini and Motoboard\u003c\/li\u003e\n\u003cli\u003e17 mm thread is the short thread, made for the flat mounting brackets\u003c\/li\u003e\n\u003cli\u003eSecure stacking with quick access when the boards are needed\u003c\/li\u003e\n\u003cli\u003ePadlock hole in the pin shaft accepts the MAXLOX padlock for theft protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePin length: long, up to 4 boards\u003c\/li\u003e\n\u003cli\u003eThread: 17 mm\u003c\/li\u003e\n\u003cli\u003eBoard compatibility: MKII, LITE, XTREME, Mini, Motoboard\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 2.52 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 7.09 x 5.11 x 1.575 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679279705,"sku":"MTXUMP17","price":115.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXUMP17-00-1x1.jpg?v=1793596460"},{"product_id":"maxtrax-mtxump40","title":"Universal Mounting Pins Long up to 4 Boards 40 mm Thread (MTXUMP40)","description":"\u003cp\u003eLong universal mounting pins with the 40 mm thread, the version for flexible or hard mount setups where the pin needs more reach through the bracket or rack. A long pin takes two to four boards in any combination of MKII, LITE and XTREME, and holds the Mini and Motoboard as well, locked down for the drive and quick to release for a recovery.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLong pins carry from two up to four boards on one mount\u003c\/li\u003e\n\u003cli\u003eMix and match MKII, LITE and XTREME boards in the same stack\u003c\/li\u003e\n\u003cli\u003eAlso carries the Mini and Motoboard\u003c\/li\u003e\n\u003cli\u003e40 mm thread is the long thread for flexible mounts or hard mount setups\u003c\/li\u003e\n\u003cli\u003eSecure stacking with quick access when the boards are needed\u003c\/li\u003e\n\u003cli\u003ePadlock hole in the pin shaft accepts the MAXLOX padlock for theft protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePin length: long, up to 4 boards\u003c\/li\u003e\n\u003cli\u003eThread: 40 mm\u003c\/li\u003e\n\u003cli\u003eBoard compatibility: MKII, LITE, XTREME, Mini, Motoboard\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 1.3 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 8.8 x 5.4 x 1.5 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679345241,"sku":"MTXUMP40","price":115.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXUMP40-00-1x1_9b2eabd8-18b2-42cd-8dd3-40977af6aaec.jpg?v=1793596463"},{"product_id":"maxtrax-mtxxbk","title":"XTREME Recovery Boards Pair Stealth Black (MTXXBK)","description":"\u003cp\u003eStealth Black XTREME recovery boards take the full size traction board to a professional level with 88 replaceable hard anodised alloy teeth set into the nylon body. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Stealth Black\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 20.0 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.4 x 13.4 x 4.2 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679476313,"sku":"MTXXBK","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXXBK.full_a6808dd2-d21a-4a30-98a3-9da74021345d.png?v=1793596468"},{"product_id":"maxtrax-mtxxdt","title":"XTREME Recovery Boards Pair Desert Tan (MTXXDT)","description":"\u003cp\u003eThe Desert Tan XTREME pair is built for the rig that recovers hard and often: alloy teeth instead of plastic cleats, moulded into a heavy duty reinforced nylon board. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Desert Tan\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 22.05 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 46.85 x 13.78 x 4.33 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679607385,"sku":"MTXXDT","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXXDT.alt_2_dae88bb0-0faf-49bd-bf08-76f6363a719f.jpg?v=1793596469"},{"product_id":"maxtrax-mtxxfjr","title":"XTREME Recovery Boards Pair Red (MTXXFJR)","description":"\u003cp\u003eRed XTREME recovery boards are the fast, repairable choice when wheel spin is unavoidable, with 88 anodised alloy teeth that bite into the tread instead of wearing away. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Red\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 22.05 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 46.85 x 13.78 x 4.33 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679672921,"sku":"MTXXFJR","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXXFJR.full_9eaa99da-845c-4357-835e-b91043f3c09f.png?v=1793596472"},{"product_id":"maxtrax-mtxxgg","title":"XTREME Recovery Boards Pair Gunmetal Grey (MTXXGG)","description":"\u003cp\u003eGunmetal Grey XTREME recovery boards keep a low key finish on the rack while packing the hardest biting teeth in the range, 88 anodised alloy teeth per board. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Gunmetal Grey\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 20.9 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.8 x 13.5 x 4.3 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679771225,"sku":"MTXXGG","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/pixcleanerResult_5cc4b495-1675-4c18-b2ad-585d8dbe280c.png?v=1793596475"},{"product_id":"maxtrax-mtxxod","title":"XTREME Recovery Boards Pair Olive Drab (MTXXOD)","description":"\u003cp\u003eOlive Drab XTREME recovery boards were shaped by feedback from military, racing and expedition users who needed a track that survives aggressive driving. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Olive Drab\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 19.5 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.3 x 13.5 x 4.2 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679836761,"sku":"MTXXOD","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXXOD.alt_2_fde25982-dd35-4946-8cef-2e63b0620329.jpg?v=1793596478"},{"product_id":"maxtrax-mtxxso","title":"XTREME Recovery Boards Pair Signature Orange (MTXXSO)","description":"\u003cp\u003eSignature Orange XTREME recovery boards wear the classic colour on the most advanced board in the lineup, with 88 alloy teeth that can each be swapped in the field. Each tooth is hard anodised against corrosion and threads into its own socket, so a damaged one comes out with a T-50 Torx bit and a new one goes in trailside. The pair weighs 9 kg (20 lb) and nests with MKII boards for stacked storage.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e88 replaceable hard anodised alloy teeth over-moulded into a heavy duty engineering grade reinforced nylon board\u003c\/li\u003e\n\u003cli\u003eAlloy is harder than tire rubber and outlasts any polymer cleat under a spinning tire, so the teeth bite faster and keep biting\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects every tooth against corrosion in salt water and mud\u003c\/li\u003e\n\u003cli\u003eField repairable: flip the board, back out a damaged tooth with a T-50 Torx bit and thread in a new one\u003c\/li\u003e\n\u003cli\u003ePatent pending thread and locking socket design keeps a replacement tooth seated\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from military units, off road racers, 4WD trainers and expedition leaders for recoveries where wheel spin is unavoidable\u003c\/li\u003e\n\u003cli\u003eSix glove friendly handles for quick placement\u003c\/li\u003e\n\u003cli\u003eNests with MKII boards for stacked storage (with a slightly larger gap because of the XTREME underside)\u003c\/li\u003e\n\u003cli\u003eLinks with Mini boards and the fixing and linking kit to build a portable roadway\u003c\/li\u003e\n\u003cli\u003eDedicated XTREME mounting pins available, including a hybrid pin for stacking XTREME boards on top of existing MKII boards\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Australia with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eColour: Signature Orange\u003c\/li\u003e\n\u003cli\u003eTeeth: 88 replaceable hard anodised alloy teeth per board\u003c\/li\u003e\n\u003cli\u003eMaterial: heavy duty engineering grade reinforced nylon\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (20 lb) per pair\u003c\/li\u003e\n\u003cli\u003eTooth tool: T-50 Torx\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 boards\u003c\/li\u003e\n\u003cli\u003ePackaged weight: 19.7 lb\u003c\/li\u003e\n\u003cli\u003ePackaged dimensions: 45.5 x 13.3 x 4.2 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxtrax","offers":[{"title":"Default Title","offer_id":47706679967833,"sku":"MTXXSO","price":633.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/MTXXSO.full_39226dea-c2e4-4e99-84f8-2f5b77fec803.png?v=1793596482"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/collections\/maxtrax-logo.png?v=1793642697","url":"https:\/\/dirtygarage.com\/collections\/maxtrax.oembed?page=2","provider":"Dirty Garage","version":"1.0","type":"link"}