{"title":"Steering Kits","description":null,"products":[{"product_id":"kryptonite-ultimate-front-end-package-2002-2009-h2","title":"2002-2009 Hummer Ultimate Front End Package (ULTIMATEH2)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you want your H2 to stand up to the challenges it looks like it's built for, look into the Ultimate Front End Package for the H2! This complete front-end kit will upgrade your hummer to be nearly unstoppable in what it can do! These Kryptonite products are built to OEM+ Specifications, giving you increased strength, and a lifetime warranty to allow you to figure out just how strong they really are without any worry!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit is, hands down, the strongest option for any HD GM truck. Fully capable of handling high-horsepower boosted launches while also maintaining comfortable street drivability. Each piece of this system is part of the Kryptonite Death Grip parts group, the absolute strongest parts available. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003eULTIMATEH2\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eComplete front-end kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOEM + Specifications for increased strength\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLifetime Warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStrongest option for handling high HP boosted launches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKryptonite SS Center Link and Tie Rod Package\u003c\/li\u003e\n\u003cli\u003eKryptonite Idler Support\u003c\/li\u003e\n\u003cli\u003eKryptonite Death Grip Pitman Arm\u003c\/li\u003e\n\u003cli\u003eKryptonite Death Grip Idler Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eThis Kit will not function properly with older style \"Drop Centrelink\" Lift kits. Or \"Drop Control Arm\" Lifts kits. For example, older Pro Comp and early 2000s Fabtech Kits.\u003c\/li\u003e\n\u003cli\u003eIf installing the Kryptonite SS Series center link on a leveled or lifted truck, you may need to install longer sway bar end links depending on how high the torsion bars have been adjusted.  We recommend the \u003cspan style=\"text-decoration: underline; color: #8a051a;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/dirtygarage.com\/products\/2001-2019-gm-hd-sway-bar-end-links-0-2-krswel02\" style=\"color: #8a051a; text-decoration: underline;\"\u003eKryptonite HD sway bar end links.\u003c\/a\u003e \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003eThis kit will only work on trucks that keep the center link in the factory position. If your truck has been lifted, make sure the lift kit you have is a spindle-style kit, not a control arm drop. This steering system is modeled after the Center Link on the H1 Military Hummer, This is a much stronger design when compared to what's offered by the factory on all non-Hummer GM HD Trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eInstallation\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #8a051a;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2084\/8209\/files\/Sway_Bar_End_Link_Kit_Install.pdf?v=1648574372\" style=\"color: #8a051a;\"\u003e\u003cstrong\u003eClick here to view installation instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKryptonite No Fine Print Lifetime Warranty:\u003c\/strong\u003e Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off-road it, wreck it, lift it- I think you get it? We don't care. If you can break it, we will replace it. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eWarranty \u003c\/em\u003eExcludes Heim Joints.\u003cbr data-mce-fragment=\"1\"\u003eYour Kryptonite products must be purchased from an authorized dealer and must complete warranty registration within 90 days of purchase.\u003c\/p\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42625031995481,"sku":"ULTIMATEH2","price":2073.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2002-2009-Hummer-Ultimate-Front-End-Package-ULTIMATEH2-Steering-Kit-KRYPTONITE-Canada.jpg?v=1756331275"},{"product_id":"kryptonite-polaris-rzr-death-grip-package-stage-1-5-2014-2023-xp","title":"2014-2023 Polaris Stage 1.5 Death Grip Package (KRZRKIT14.5)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned with HD 5\/8\" Chromoly Heim joints, this High Strength Tie Rod Kit is perfect for withstanding years of off-road abuse. These High Clearance Radius Rods are made from high-strength 6061 T6 aircraft-grade aluminum and are designed to eliminate any weak points in the factory Steering. All components come in a cool, hard anodized matte black finish with the Kryptonite logo engraved and are 100% bolt-on OEM replacements. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e KRZRKIT14.5 (XP 1000: 2014)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e KRZRKIT16.5 (XP 1000: 2015-2016) (XP TURBO: 2016)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e KRZRKIT18.5 (XP 1000: 2017-2018)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e KRZRKIT18.5T (XP 1000: 2019-2023) (XP TURBO: 2017-2023)\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Strength and Rigidity over OEM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDirect Bolt-on Replacement\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUnique Billet Hex Style Body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Suspension Clearance in all Terrain \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from High Strength 6061 T6 Aircraft-Grade Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCNC Machined for Precision Finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAdjustable High Strength Rod Ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDurable Hard Anodized Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTie Rods and Radius Rods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eChromoly Heim Joint outer rod end and \u0026amp; Death Grip inner rod end\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eHD 5\/8\" Chromoly Heim joints \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eExtremely\u003c\/span\u003e\u003cspan\u003e high range of motion\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003ePerfect for Long travel or custom applications\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6 style=\"text-align: left;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eKryptonite No Fine Print Lifetime Warranty:\u003c\/strong\u003e Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear, or breakage. Race it, jump it, off-road it, wreck it, lift it- you get it? We don't care. If you can break it, we will replace it. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eWarranty \u003c\/em\u003eExcludes Heim Joints.\u003cbr\u003eYour Kryptonite products must be purchased from an authorized dealer and must complete warranty registration within 90 days of purchase.\u003c\/p\u003e","brand":"KRYPTONITE","offers":[{"title":"2014 XP1000","offer_id":42625036845145,"sku":"KRZRKIT14.5","price":1623.99,"currency_code":"CAD","in_stock":true},{"title":"2015-2016 XP 1000 \/2016 XP Turbo","offer_id":42625036877913,"sku":"KRZRKIT16.5","price":1623.99,"currency_code":"CAD","in_stock":true},{"title":"2017-2018 XP1000","offer_id":42625036910681,"sku":"KRZRKIT18.5","price":1623.99,"currency_code":"CAD","in_stock":true},{"title":"2019-2021 XP1000 + 2017-2021 XP TURBO","offer_id":42625036943449,"sku":"KRZRKIT18.5T","price":1623.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2014-2023-Polaris-Stage-1_5-Death-Grip-Package-KRZRKIT114_5-UTV-Steering-Components-KRYPTONITE-Canada.png?v=1756331468"},{"product_id":"kryptonite-polaris-rzr-hard-core-steering-and-suspension-package-stage-1","title":"2015-2023 Polaris Stage 1 Death Grip Package (KRZRKIT15)","description":"\u003ch6 style=\"text-align: left;\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMade from strong 6061 T6 aircraft-grade aluminum, these High Clearance Radius Rods eliminate any weak points in your rear suspension and give you higher ground clearance on any terrain. Sleek, hard anodized matte black finish with the Kryptonite logo engraved for added style. \u003c\/span\u003eThis kit comes complete with everything needed for installation. Kryptonite Steering and Suspension HD high clearance radius rods, Tie Rods that are a direct bolt-on OEM replacement, and do not require any modification for installation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eKRZRKIT1X\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Strength and Rigidity over OEM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDirect Bolt-on Replacement\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUnique Billet Hex Style Body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Suspension Clearance in all Terrain \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from High Strength 6061 T6 Aircraft-Grade Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCNC Machined for Precision Finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAdjustable High Strength Rod Ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDurable Hard Anodized Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComplete Kit includes Tie Rods and Radius Rods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eStage 1 Death Grip Tie Rod Kits Come with the Death Grip Inner Tie Rod ends.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eThe Stage 2 Kit comes with the Heim Joint and Clevis Inner assembly.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKryptonite No Fine Print Lifetime Warranty:\u003c\/strong\u003e Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off-road it, wreck it, lift it, I think you get it? We don't care. If you can break it we will replace it. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eWarranty \u003c\/em\u003eExcludes Heim Joints.\u003cbr data-mce-fragment=\"1\"\u003eYour Kryptonite products must be purchased from an authorized dealer and must complete warranty registration within 90 days of purchase.\u003c\/p\u003e","brand":"KRYPTONITE","offers":[{"title":"2015-2016 XP 1000 \/2016 XP Turbo","offer_id":42625038024793,"sku":"KRZRKIT15","price":1449.99,"currency_code":"CAD","in_stock":true},{"title":"2017-2018 XP 1000","offer_id":42625038057561,"sku":"KRZRKIT17","price":1449.99,"currency_code":"CAD","in_stock":true},{"title":"2019-2023 XP 1000 \/ 2017-2023 XP TURBO","offer_id":42625038090329,"sku":"KRZRKIT17T","price":1449.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2015-2023-Polaris-Stage-1-Death-Grip-Package-KRZRKIT1X-UTV-Steering-Components-KRYPTONITE-Canada.png?v=1756331517"},{"product_id":"polaris-rzr-xp-1000-turbo-hard-core-steering-and-suspension-package","title":"2014-2023 Polaris Stage 2 Death Grip Package (KRZRKIT14)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned with HD 5\/8\" Chromoly Heim joints, this High Strength Tie Rod Kit is perfect for withstanding years of off-road abuse. These High Clearance Radius Rods are direct bolt-ons, made from high-strength 6061 T6 aircraft-grade aluminum and are designed to eliminate any weak points in the factory Steering. Extremely high range on motion; Perfect for Long travel or custom applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRadius Rods and Tie Rods come in a cool, hard anodized matte black finish with the Kryptonite logo engraved, adding extra style along with premium grade adjustable rod ends give even more adjustability than the factory options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003eKRZRKIT1X\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Strength and Rigidity over OEM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDirect Bolt-on Replacement\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUnique Billet Hex Style Body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eImproved Suspension Clearance in all Terrain \u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade from High Strength 6061 T6 Aircraft-Grade Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCNC Machined for Precision Finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAdjustable High Strength Rod Ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDurable Hard Anodized Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComplete Kit includes Tie Rods and Radius Rods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eBuilt with heavy-duty 5\/8\" Chromoly Heim Joints\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eStage 1 Death Grip Tie Rod Kits Come with the Death Grip Inner Tie Rod ends. The Stage 2 Kit comes with the Heim Joint and Clevis Inner assembly\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eMake the correct selection in the drop down. XP 1000 gets a M14x1.5 Inner. And XP Turbo gets a M16x1.5 Inner.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6 style=\"text-align: left;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKryptonite No Fine Print Lifetime Warranty:\u003c\/strong\u003e Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off-road it, wreck it, lift it, I think you get it? We don't care. If you can break it we will replace it. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cem data-mce-fragment=\"1\"\u003eWarranty \u003c\/em\u003eExcludes Heim Joints.\u003cbr data-mce-fragment=\"1\"\u003eYour Kryptonite products must be purchased from an authorized dealer and must complete warranty registration within 90 days of purchase.\u003c\/p\u003e","brand":"KRYPTONITE","offers":[{"title":"2014 XP1000","offer_id":42625038549081,"sku":"KRZRKIT14","price":1768.99,"currency_code":"CAD","in_stock":true},{"title":"2015-2016 XP1000 + 2016 XP Turbo","offer_id":42625038581849,"sku":"KRZRKIT16","price":1768.99,"currency_code":"CAD","in_stock":true},{"title":"2017-2018 XP1000","offer_id":42625038614617,"sku":"KRZRKIT18","price":1768.99,"currency_code":"CAD","in_stock":true},{"title":"2019-2021 XP1000 + 2017-2021 XP TURBO","offer_id":42625038647385,"sku":"KRZRKIT18T","price":1768.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/2014-2023-Polaris-Stage-2-Death-Grip-Package-KRZRKIT1X-UTV-Steering-Components-KRYPTONITE-Canada.png?v=1756331536"},{"product_id":"2014-2025-ram-hd-complete-steering-kit-krdsk14","title":"2014-2025 Ram HD Complete Steering Kit (KRDSK14)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Kryptonite Death Grip Complete Steering Kit is the ultimate steering upgrade for your Ram 2500 or 2013+ Ram 3500 4X4.\u003c\/p\u003e\n\u003cp\u003eConstructed from solid 7075 aluminum with a massive 2\" outer diameter, this kit is designed for maximum durability and adjustability,with no need to remove from the truck for alignment changes. It allows for proper steering wheel position and alignment at any ride height from stock up to a 6\" lift.\u003c\/p\u003e\n\u003cp\u003eThe solid-link design ensures straight tracking, reduced wander, and a more positive steering feel. Tie rod ends are compatible with any steering stabilizer using OEM mounts.\u003c\/p\u003e\n\u003cp\u003eThe innovative Death Grip Tapered Jam Nut System ensures a secure fit without sacrificing adjustability. The durable black powder coat finish resists corrosion, keeping your steering components looking and performing their best.\u003c\/p\u003e\n\u003cp\u003eEngineered for heavy-duty use, this kit can handle the toughest workloads and off-road conditions while delivering precision performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOversized heavy-duty rod ends\u003c\/li\u003e\n\u003cli\u003eExtreme-strength 7075-grade aluminum link\u003c\/li\u003e\n\u003cli\u003eUnique tapered Death Grip jam nut system\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in replacement\u003c\/li\u003e\n\u003cli\u003eImproved strength and rigidity over OEM\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42825976610905,"sku":"KRDSK14","price":2174.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/KRDSK14.png?v=1762790533"},{"product_id":"2005-2025-superduty-steering-kit-krfsk05","title":"2005-2025 Superduty Steering Kit (KRFSK05)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur new Death Grip Complete Steering Kit is here! This is just what you need if your looking for the ultimate steering upgrade to your F250\/F350 Truck! Solid 7075 Aluminum design, massive 2\" outer diameter was designed and built for maximum durability and adjustability with no need to remove from the truck to adjust. This versatile steering kit will allow for correct steering wheel position and alignment at any ride height from stock and up mounted in the factory location. Solid design maintains straight tracking and drivability, less wander and a more positive steering feel.\u003c\/p\u003e\n\u003cp\u003eDrag Link comes equipped with a relief area which allows for the use of our steering stabilizer clamp assembly. Our clamp assembly is required to run a stabilizer in the factory location, this is highly recommended for the best performance.\u003c\/p\u003e\n\u003cp\u003eAdditionally the Tie Rod assembly comes equipped with dual relief areas which allows for the use of a Dual Steering stabilizer system. Most popular brand dual stabilizer kits will work in conjunction with our steering system. Our Clamp assembly kit will be required to complete installation.\u003c\/p\u003e\n\u003cp\u003eThis steering system utilizes our new unique \"Death Grip Tapered Jam Nut System\". This is a revolutionary way to ensure a secure fit with no loss of adjustability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOversized Heavy Duty Rod Ends\u003c\/li\u003e\n\u003cli\u003eExtreme Strength 7075 Grade Link\u003c\/li\u003e\n\u003cli\u003eUnique Tapered Death Grip Jam Nut System\u003c\/li\u003e\n\u003cli\u003eDirect Bolt In Replacement\u003c\/li\u003e\n\u003cli\u003eImproved Strength and Rigidity over OEM\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42825977331801,"sku":"KRFSK05","price":2174.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/KRFSK05.png?v=1762790528"},{"product_id":"2005-2024-superduty-complete-steering-kit-krfsk55","title":"2005-2024 F-4\/550 Complete Steering Kit (KRFSK55)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur new Death Grip Complete Steering Kit is here! This is just what you need if your looking for the ultimate steering upgrade to your F450\/F550 Truck! Solid 7075 Aluminum design, massive 2\" outer diameter was designed and built for maximum durability and adjustability with no need to remove from the truck to adjust. This versatile steering kit will allow for correct steering wheel position and alignment at any ride height from stock and up mounted in the factory location. Solid design maintains straight tracking and drivability, less wander and a more positive steering feel. Additionally the Tie Rod assembly comes equipped with dual relief areas which allows for the use of a Dual Steering stabilizer system. Most popular brand dual stabilizer kits will work in conjunction with our steering system. Our Clamp assembly kit will be required to complete installation. This steering system utilizes our new unique \"Death Grip Tapered Jam Nut System\". This is a revolutionary way to ensure a secure fit with no loss of adjustability.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOversized Heavy Duty Rod Ends\u003c\/li\u003e\n\u003cli\u003eExtreme Strength 7075 Grade Link\u003c\/li\u003e\n\u003cli\u003eUnique Tapered Death Grip Jam Nut System\u003c\/li\u003e\n\u003cli\u003eDirect Bolt In Replacement\u003c\/li\u003e\n\u003cli\u003eImproved Strength and Rigidity over OEM\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42825979166809,"sku":"KRFSK55","price":2174.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/KRFDK55_M.png?v=1762790526"},{"product_id":"2001-2010-gm-hd-ultimate-front-end-package-ultimate10","title":"2001-2010 GM HD Ultimate Front End Package (ULTIMATE10)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eIf you're looking for the strongest, most complete front-end upgrade for your GM HD truck,this is it. The Kryptonite Ultimate Front End Package includes everything you need to completely replace and upgrade the factory steering system with the toughest parts Kryptonite makes.\u003c\/p\u003e\n\u003cp\u003eEvery component in this kit is part of the Kryptonite Death Grip Series, known for its unmatched durability and performance. From drag-strip launches to worksite hauling, this system can take anything you throw at it,and still provide smooth, precise steering on the street.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-One Steering System – Includes every major steering component, fully upgraded and matched\u003c\/li\u003e\n\u003cli\u003eBuilt for Extreme Demands – Handles high-horsepower launches while maintaining street comfort\u003c\/li\u003e\n\u003cli\u003eH1-Inspired Design – Modeled after the military-grade Hummer H1 centerlink system for maximum strength\u003c\/li\u003e\n\u003cli\u003eFactory Geometry – Maintains factory alignment specs and driving characteristics\u003c\/li\u003e\n\u003cli\u003eBolt-On Compatibility – Direct factory replacement\u003c\/li\u003e\n\u003cli\u003eMade in the USA – Engineered, tested, and manufactured for real-world HD truck use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42825982640217,"sku":"ULTIMATE10","price":2174.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/Ultimate10_2023_M.png?v=1762790543"},{"product_id":"2011-2025-gm-hd-ultimate-front-end-package-ultimate11","title":"2011-2025 GM HD Ultimate Front End Package (ULTIMATE11)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eIf you're looking for the absolute best front-end upgrade for your GM HD truck, look no further. The Kryptonite Ultimate Front End Package is engineered for unmatched strength, performance, and reliability. This all-in-one kit includes every critical moving component in your steering system, delivering the strongest solution on the market,fully capable of handling high-horsepower boosted launches while maintaining smooth street drivability.\u003c\/p\u003e\n\u003cp\u003eEvery component in this package is part of the Kryptonite Death Grip product group, engineered to dominate under extreme loads without sacrificing control or comfort.\u003c\/p\u003e","brand":"KRYPTONITE","offers":[{"title":"Factory Size Outer Rod End","offer_id":42825983885401,"sku":"ULTIMATE11","price":2174.99,"currency_code":"CAD","in_stock":true},{"title":"Fabtech RTS Outer Rod End","offer_id":42825983918169,"sku":"ULTIMATE11-FT","price":2174.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/Ultimate11_2023.png?v=1762790558"},{"product_id":"1999-2006-gm-1500-ultimate-front-end-package-ultimate99","title":"1999-2006 GM 1500 Ultimate Front End Package (ULTIMATE99)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eLooking for the best front-end upgrade for your truck? Look no further.\u003cbr data-end=\"141\" data-start=\"138\"\u003eThe Ultimate Front End Kit includes every moving component of your steering system and is hands down the strongest option available for any GM truck. Designed to handle high-horsepower and higher strain 4x4 scenarios while maintaining smooth, street-friendly drivability, this kit delivers performance without compromise retaining the stock turning radius.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eE-Coated Rod Ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZinc Coated 1144 High Carbon Center Link\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDurable Powder Coated Tie Rod Bodies\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet Idler Support and Idler Arm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eForged Uni-spline Pitman Arm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePre-greased Joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KRYPTONITE","offers":[{"title":"Default Title","offer_id":42826346201177,"sku":"ULTIMATE99","price":2073.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ULTIMATE99_720x_aa5c5425-fb9d-4a7b-97c1-f93c1be53441.webp?v=1762807967"},{"product_id":"2001-2010-gm-hd-steering-upgrade-kit-1032160","title":"2001-2010 GM HD Steering Upgrade Kit (1032160)","description":"\u003cp\u003eThe BD Diesel Steering Upgrade Kit is a comprehensive and economic solution engineered to reinforce a major common weak point on Chevrolet\/GM HD series trucks: the steering linkage and tie rods. These components are prone to failure (including loose steering, wheel toe-in under load, and broken tie rods) due to high torque engines, lift kits, and larger tires. This kit includes a Centerlink, two tie rods, two sway bar end links, a pitman arm (3-spline), and an idler arm. The core of the system is the forged I-Beam Centerlink, which is 30% stronger than the original equipment manufacturer (OEM) part, reducing flex and creating a robust base. The tie rods are 1.5 times thicker than OEM and feature larger, greaseable ball joints (with sintered bearings) proven to handle over double the force of OEM rods. The entire package retains factory geometry for accurate steering, eliminating dangerous \"bump steer\" and increasing the durability, longevity, and dependability of your truck.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eForged I-Beam Centerlink is 30% stronger than OEM for less deflection\u003c\/li\u003e\n\u003cli\u003eForged Centerlink retains factory geometry for accurate steering\u003c\/li\u003e\n\u003cli\u003eTie rods are 1.5x larger than OEM for reduced flex\u003c\/li\u003e\n\u003cli\u003eLarger Greaseable Ball Joints for long service life and better load holding\u003c\/li\u003e\n\u003cli\u003eSway bar end links are 1-inch longer than factory to accommodate leveling kits and larger tie rods\u003c\/li\u003e\n\u003cli\u003eDurable polyurethane sway bar end link bushings shaped for articulation and durability\u003c\/li\u003e\n\u003cli\u003eGreaseable pitman arm and idler arm\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM components for drop-in replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCenterlink Material: Forged I-Beam (30% stronger than OEM)\u003c\/li\u003e\n\u003cli\u003eTie Rod Shaft: 1.5x thicker than OEM\u003c\/li\u003e\n\u003cli\u003eSway Bar End Links: 1 inch longer than factory\u003c\/li\u003e\n\u003cli\u003ePitman Arm: 3-spline\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 3 Hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eThe product is backed by a 12-month warranty on parts.\u003c\/li\u003e\n\u003cli\u003eA Limited Lifetime Warranty is available with registration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":42886368067673,"sku":"1032160","price":1247.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/steering-upgrade-kit-chevy-gmc-duramax-1500hd-2001-2003-and-2005-2007-and-2500-hd-3500hd-silverado-sierra-2001-2010_800x800_25033765-868c-421e-a562-126e2028d34c.webp?v=1764625226"},{"product_id":"all-balls-racing-2011-can-am-commander-800-std-rack-boot-kit","title":"2011 Can-Am Commander 800 STD Rack Boot Kit (51-3003)","description":"\u003cp\u003eKeep your machine running at its best with the 2011 Can-Am Commander 800 STD Rack Boot Kit from All Balls Racing. Built to meet or exceed OE specifications, this is the replacement part your ride needs — engineered for durability and reliable performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets or exceeds OEM specifications\u003c\/li\u003e\n  \u003cli\u003eDirect replacement — no modifications needed\u003c\/li\u003e\n  \u003cli\u003eTrusted All Balls Racing quality and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eManufacturer Description\u003c\/h3\u003e\n\u003cp\u003eThe All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of todays ATV's and UTV's.\u003c\/p\u003e","brand":"All Balls Racing","offers":[{"title":"Default Title","offer_id":42987561549913,"sku":"51-3003","price":45.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/c5101851537ce6b79cbf31171154d090.jpg?v=1768424777"},{"product_id":"all-balls-racing-2015-polaris-ranger-570-full-size-steering-rack","title":"2015 Polaris Ranger 570 Full Size Steering Rack (51-4003)","description":"\u003cp\u003eKeep your machine running at its best with the 2015 Polaris Ranger 570 Full Size Steering Rack from All Balls Racing. Built to meet or exceed OE specifications, this is the replacement part your ride needs — engineered for durability and reliable performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement — no modifications needed\u003c\/li\u003e\n  \u003cli\u003eTrusted All Balls Racing quality and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eManufacturer Description\u003c\/h3\u003e\n\u003cp\u003eAll Balls Racing 2015 Polaris Ranger 570 Full Size Steering Rack\u003c\/p\u003e","brand":"All Balls Racing","offers":[{"title":"Default Title","offer_id":42987561615449,"sku":"51-4003","price":303.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/23cedf0b328dbd2ac93e09eb8cc72ff2.jpg?v=1768424777"},{"product_id":"rugged-ridge-hd-steering-kit-w-damper-84-06-jeep-xj-zj-tj","title":"HD Steering Kit W\/ Damper 1984-2006 XJ ZJ TJ (18050.88)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eBeef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1\/4  in. OD steel that is cold rolled, pierced, and drawn through dies to produce a 1\/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7\/8  in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Kit includes damper. Will not work with Factory Rubicon Wheels. Not recommended for vehicles with over 4  in. of lift. Not compatible with smaller OEM steel wheels or wheels with deep backspacing. Not recommended for vehicles with under 2  in. of suspension lift.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOne Ton Strength\u003c\/li\u003e\n\u003cli\u003e1\/4 in. Wall Thickness\u003c\/li\u003e\n\u003cli\u003eUses 7\/8 in. Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003eTrue DOM Tubing w\/No Seams\u003c\/li\u003e\n\u003cli\u003eIncludes Drag Link, Tie Rod, Ends\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":42997837889625,"sku":"18050.88","price":753.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/4e3f24438ea20bfd3061b8232bf84cc8.jpg?v=1768847639"},{"product_id":"ford-racing-2021-ford-bronco-severe-duty-steering-upgrade-kit","title":"2021+ Bronco Severe Duty Steering Upgrade Kit (M-3200-WT)","description":"\u003cp\u003eUpgrade your ride with the 2021+ Bronco Severe Duty Steering Upgrade Kit from Ford Racing. Backed by decades of motorsport heritage and factory engineering, this is genuine Ford Performance quality built for enthusiasts who demand the best.\u003c\/p\u003e\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eUpgrade your Bronco's off-road capability with an all-new, complete, ready-to-install Steering Gear from Ford Performance Parts. Featuring a higher torque motor and improved and reinforced steering gear casing from the Bronco Raptor, stronger inner tie rods with improved articulation, and reinforced outer tie rods with increased deflection ball joints. Significantly reduces steering efforts in various off-road conditions.\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":43021104742489,"sku":"M-3200-WT","price":1942.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/6ae26392a132a8fcf83a7747697afea8L.jpg?v=1769453563"},{"product_id":"universal-extreme-duty-forged-78-inch-drilled-steering-assembly-kit-66l-duramax-2500hd3500hd-158101120","title":"2011-2025 GM HD Extreme-Duty Forged 7\/8\" Drilled Steering Assembly Kit (158101120)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eGive your HD steering system a base that far exceeds the factory design. This complete Extreme-Duty kit is built for trucks running larger wheels and tires, more power, or hard use like drag racing, sled pulling, and off-roading, with everything needed to upgrade the factory 2500\/3500 HD steering in one box.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eForged steel OE-style (dog-leg) center link, 1.5\" diameter with a 7\/8\" drill\u003c\/li\u003e\n\u003cli\u003eExtreme-Duty forged pitman arm and idler arm, each with replaceable dual bearings\u003c\/li\u003e\n\u003cli\u003ePair of Stage 3 forged tie rod assemblies with 1.5\" wide rods and 2-1\/3\" ball joints\u003c\/li\u003e\n\u003cli\u003eLarger, stronger adjustable inner ball joint\u003c\/li\u003e\n\u003cli\u003eSpring-loaded gusher-bearing outer tie rod ends for constant pressure\u003c\/li\u003e\n\u003cli\u003eIncludes a pitman arm puller for easy stock center-link removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\u003cli\u003eDo not exceed 500 PSI when applying grease; over-pressuring can damage the grease caps, cause tie rod failure, and void the warranty.\u003c\/li\u003e\u003c\/ul\u003e","brand":"PPE","offers":[{"title":"Default Title","offer_id":43149252886617,"sku":"158101120","price":1533.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/158101120-HFTD.jpg?v=1773421808"},{"product_id":"universal-extreme-duty-forged-78-inch-drilled-steering-assembly-kit-158100110","title":"2001-2010 GM HD Extreme Duty Forged 7\/8\" Drilled Steering Assembly Kit (158100110)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eGive your steering system a strong base that vastly improves on the factory design. Perfect for those who have added larger wheels and tires, more horsepower, or use their vehicle for drag racing, sled-pulling, or off-roading.\u003c\/p\u003e\u003cp\u003eThis Extreme-Duty Steering Kit comes complete with everything you need to upgrade your 2001-2010 GM factory 2500\/3500HD components. The OE-Style (dog leg) Center Link is forged steel and sports a massive 1.5 inch diameter with a 7\/8 inch drill to accommodate the PPE Extreme-Duty Forged Pitman Arm and Extreme-Duty Forged Idler Arm, which both come with replaceable dual bearings.\u003c\/p\u003e\u003cp\u003eAlso included in this extreme duty kit are a pair of Stage3 Forged Tie Rod Assemblies. These tie rod assemblies are the best of the best.\u003c\/p\u003e\u003cp\u003eFeaturing 1.5 inch wide, forged tie rods, massive 2 1\/3 inch ball joints and a much larger and stronger, adjustable inner ball joint. PPE outer tie rod ends feature a spring-loaded gusher bearing that maintains constant pressure. This kit ensures long-lasting strength up front.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eExtreme-Duty, Forged 7\/8 Inch Drilled Steering Assembly Kit (158100110)\u003c\/li\u003e\n\u003cli\u003eMassive 1.5 inch diameter OE-Style Center Link\u003c\/li\u003e\n\u003cli\u003eForged PPE 7\/8 Inch Pitman and Forged PPE 7\/8 Inch Idler Arm\u003c\/li\u003e\n\u003cli\u003eZerk fittings ensure easy maintenance\u003c\/li\u003e\n\u003cli\u003eStage3 Forged Tie Rod Assemblies\u003c\/li\u003e\n\u003cli\u003eSold As A Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPE","offers":[{"title":"Default Title","offer_id":43149360988249,"sku":"158100110","price":1533.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/158100110-HFTD.jpg?v=1773423325"},{"product_id":"2007-2018-wrangler-jk-hd-steering-kit-fox-ifp-stabilizer-syn8025-11","title":"2007-2018 Wrangler JK HD Steering Kit with FOX IFP Stabilizer (8025-11)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA direct bolt in replacement for the factory JK steering that delivers an immediate upgrade in feel, stiffness, and strength. This 8025-11 configuration adds a Synergy tuned FOX IFP steering stabilizer with the clamp and mount stud to tame bump steer on and off road. Single plane tie rod ends eliminate unwanted drag link and tie rod flop, so your Wrangler tracks straight and stays centered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8025-11\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link bolts into the factory mounts or can be relocated to the top of the steering knuckle for a high steer setup using the included flip adapter\u003c\/li\u003e\n\u003cli\u003eDrag link made from 1.5\" x .250 wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod made from 1.5\" x .188 wall 4130 chromoly, heat treated for over 200 percent more strength than stock\u003c\/li\u003e\n\u003cli\u003eSynergy HD metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane at the pitman arm side to eliminate drag link flop\u003c\/li\u003e\n\u003cli\u003eSynergy Double Adjuster Sleeve allows length adjustment without removing the bar from the vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned FOX IFP steering stabilizer with clamp and mount stud\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8000-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Tie Rod (8002-15)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-50)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned FOX IFP Steering Stabilizer (6401-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link is used in the stock location for up to 3 inches of lift. For 3 to 6 inches of lift the drag link should be flipped for a high steer setup\u003c\/li\u003e\n\u003cli\u003eHigh steer setup requires relocating the drag link to the top of the steering knuckle and a raised front axle side track bar relocation bracket (Synergy 8055, 8012-13, or 8009-01)\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eTie rod or flipped drag link requires a 16 inch or larger wheel with a maximum 4 3\/4 inch backspacing; 4 1\/2 inch backspacing recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e\n","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43791808495705,"sku":"8025-11","price":1836.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8025-01-MAIN-1200_202.jpg?v=1784910521"},{"product_id":"2007-2018-wrangler-jk-hd-steering-kit-syn8025-00","title":"2007-2018 Wrangler JK HD Steering Kit (8025-00)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA direct bolt in replacement for the factory JK steering that delivers an immediate upgrade in feel, stiffness, and strength. This 8025-00 kit pairs a heat treated 1.5 inch 4130 chromoly tie rod with a DOM drag link and Synergy single plane tie rod ends to eliminate drag link and tie rod flop, so your Wrangler tracks straight and stays centered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8025-00\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link bolts into the factory mounts or can be relocated to the top of the steering knuckle for a high steer setup using the included flip adapter\u003c\/li\u003e\n\u003cli\u003eDrag link made from 1.5\" x .250 wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod made from 1.5\" x .188 wall 4130 chromoly, heat treated for over 200 percent more strength than stock\u003c\/li\u003e\n\u003cli\u003eSynergy HD metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane at the pitman arm side to eliminate drag link flop\u003c\/li\u003e\n\u003cli\u003eSynergy Double Adjuster Sleeve allows length adjustment without removing the bar from the vehicle\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8000-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Tie Rod (8002-15)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link is used in the stock location for up to 3 inches of lift. For 3 to 6 inches of lift the drag link should be flipped for a high steer setup\u003c\/li\u003e\n\u003cli\u003eHigh steer setup requires relocating the drag link to the top of the steering knuckle and a raised front axle side track bar relocation bracket (Synergy 8055, 8012-13, or 8009-01)\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eTie rod or flipped drag link requires a 16 inch or larger wheel with a maximum 4 3\/4 inch backspacing; 4 1\/2 inch backspacing recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43804398354521,"sku":"8025-00","price":1332.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8025-01-D1-1200_1.jpg?v=1784916314"},{"product_id":"2007-2018-wrangler-jk-hd-steering-kit-stabilizer-clamp-stud-syn8025-10","title":"2007-2018 Wrangler JK HD Steering Kit with Stabilizer Clamp and Stud (8025-10)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA direct bolt in replacement for the factory JK steering that delivers an immediate upgrade in feel, stiffness, and strength. This 8025-10 kit adds a steering stabilizer clamp and mount stud so you can add your choice of steering stabilizer, on top of a heat treated 1.5 inch 4130 chromoly tie rod, DOM drag link, and Synergy single plane tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8025-10\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link bolts into the factory mounts or can be relocated to the top of the steering knuckle for a high steer setup using the included flip adapter\u003c\/li\u003e\n\u003cli\u003eDrag link made from 1.5\" x .250 wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod made from 1.5\" x .188 wall 4130 chromoly, heat treated for over 200 percent more strength than stock\u003c\/li\u003e\n\u003cli\u003eSynergy HD metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane at the pitman arm side to eliminate drag link flop\u003c\/li\u003e\n\u003cli\u003eSynergy Double Adjuster Sleeve allows length adjustment without removing the bar from the vehicle\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a steering stabilizer clamp and mount stud to add your choice of stabilizer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8000-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Tie Rod (8002-15)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-50)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link is used in the stock location for up to 3 inches of lift. For 3 to 6 inches of lift the drag link should be flipped for a high steer setup\u003c\/li\u003e\n\u003cli\u003eHigh steer setup requires relocating the drag link to the top of the steering knuckle and a raised front axle side track bar relocation bracket (Synergy 8055, 8012-13, or 8009-01)\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eTie rod or flipped drag link requires a 16 inch or larger wheel with a maximum 4 3\/4 inch backspacing; 4 1\/2 inch backspacing recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43804398452825,"sku":"8025-10","price":1504.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8025-01-D2-1200.jpg?v=1784916322"},{"product_id":"2018-wrangler-jl-gladiator-jt-hd-steering-kit-syn8825-00","title":"2018-2025 Wrangler JL \/ Gladiator JT HD Steering Kit (8825-00)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA complete bolt in replacement for the factory JL, JLU, and Gladiator steering that eliminates bent tie rods, constant re-centering, and death wobble. This 8825-00 kit pairs a 1.5 inch x .250 wall DOM drag link with a heat treated 1.5 inch 4130 chromoly tie rod and forged Synergy single plane tie rod ends for precise, durable steering on and off road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-00\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod formed from 1.5\" x .188 wall heat treated 4130 chromoly, significantly stronger than OEM\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop\u003c\/li\u003e\n\u003cli\u003eHeavy duty tie rod bent to clear the sway bar mounts, differential cover, and pitman arm, and supports stabilizer and hydro assist applications\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening\u003c\/li\u003e\n\u003cli\u003eFully welded, sealed forged pinch bolt housings for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Chromoly Tie Rod (8802-11)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket, and wheels with proper backspacing\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eIf reusing the stock steering stabilizer or a stabilizer with 1\/2 inch mounting bolts, the Synergy 8807-03 Steering Stabilizer Relocation Kit is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808237879385,"sku":"8825-00","price":1476.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-00-MAIN-1200.jpg?v=1784918645"},{"product_id":"2018-wrangler-jl-gladiator-jt-hd-steering-kit-stabilizer-clamp-stud-syn8825-10","title":"2018-2025 Wrangler JL \/ Gladiator JT HD Steering Kit with Stabilizer Clamp and Stud (8825-10)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA complete bolt in replacement for the factory JL, JLU, and Gladiator steering that eliminates bent tie rods, constant re-centering, and death wobble. This 8825-10 kit adds a steering stabilizer clamp and mount stud so you can add your choice of stabilizer, on top of a DOM drag link, heat treated 4130 chromoly tie rod, and forged Synergy single plane tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-10\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod formed from 1.5\" x .188 wall heat treated 4130 chromoly, significantly stronger than OEM\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop\u003c\/li\u003e\n\u003cli\u003eHeavy duty tie rod bent to clear the sway bar mounts, differential cover, and pitman arm, and supports stabilizer and hydro assist applications\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening\u003c\/li\u003e\n\u003cli\u003eFully welded, sealed forged pinch bolt housings for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a steering stabilizer clamp and mount stud to add your choice of stabilizer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Chromoly Tie Rod (8802-11)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-50)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket, and wheels with proper backspacing\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eIf reusing the stock steering stabilizer or a stabilizer with 1\/2 inch mounting bolts, the Synergy 8807-03 Steering Stabilizer Relocation Kit is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808238075993,"sku":"8825-10","price":1648.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-10-MAIN-1200.jpg?v=1784918649"},{"product_id":"2018-wrangler-jl-gladiator-jt-hd-steering-kit-fox-stabilizer-syn8825-11","title":"2018-2025 Wrangler JL \/ Gladiator JT HD Steering Kit with FOX Stabilizer (8825-11)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA complete bolt in replacement for the factory JL, JLU, and Gladiator steering that eliminates bent tie rods, constant re-centering, and death wobble. This 8825-11 configuration adds a Synergy tuned FOX 2.0 steering stabilizer with clamp and mount stud, on top of a DOM drag link, heat treated 4130 chromoly tie rod, and forged Synergy single plane tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-11\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eTie rod formed from 1.5\" x .188 wall heat treated 4130 chromoly, significantly stronger than OEM\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop\u003c\/li\u003e\n\u003cli\u003eHeavy duty tie rod bent to clear the sway bar mounts, differential cover, and pitman arm, and supports stabilizer and hydro assist applications\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening\u003c\/li\u003e\n\u003cli\u003eFully welded, sealed forged pinch bolt housings for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned FOX 2.0 steering stabilizer with clamp and mount stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Chromoly Tie Rod (8802-11)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-50)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned FOX 2.0 Steering Stabilizer (6401-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket, and wheels with proper backspacing\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eIf reusing the stock steering stabilizer or a stabilizer with 1\/2 inch mounting bolts, the Synergy 8807-03 Steering Stabilizer Relocation Kit is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808238272601,"sku":"8825-11","price":1980.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-11-MAIN-1200.jpg?v=1784918653"},{"product_id":"2018-wrangler-jl-gladiator-jt-titan-hd-steering-kit-stabilizer-clamp-stud-syn8825-20","title":"2018-2025 Wrangler JL \/ Gladiator JT Titan HD Steering Kit with Stabilizer Clamp and Stud (8825-20)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Synergy Titan Series is the extreme duty steering upgrade for 2018 and newer JL, JLU, and Gladiator, engineered for lifted Jeeps, oversized tires, and hard trail use. This 8825-20 kit runs a massive 1.75 inch heat treated 4130 chromoly Titan tie rod and a DOM drag link with a stabilizer clamp and mount stud so you can add your choice of stabilizer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-20\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eTitan Series tie rod formed from 1.75\" x .188 wall heat treated 4130 chromoly for extreme strength and reliability\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop\u003c\/li\u003e\n\u003cli\u003eHeavy duty tie rod bent to clear the sway bar mounts, differential cover, and pitman arm, and supports stabilizer and hydro assist applications\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening\u003c\/li\u003e\n\u003cli\u003eIncludes a drag link flip adapter for high steer setups\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a steering stabilizer clamp and mount stud to add your choice of stabilizer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x Titan Series Chromoly Tie Rod (8802-175)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-75)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket, and wheels with proper backspacing\u003c\/li\u003e\n\u003cli\u003eRequires a maximum wheel backspacing of 4.5 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eIf reusing the stock steering stabilizer or a stabilizer with 1\/2 inch mounting bolts, the Synergy 8807-03 Steering Stabilizer Relocation Kit is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808605405273,"sku":"8825-20","price":1684.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-20-MAIN-1200_1.jpg?v=1784918833"},{"product_id":"2018-wrangler-jl-gladiator-jt-titan-hd-steering-kit-fox-stabilizer-syn8825-21","title":"2018-2025 Wrangler JL \/ Gladiator JT Titan HD Steering Kit with FOX Stabilizer (8825-21)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Synergy Titan Series is the extreme duty steering upgrade for 2018 and newer JL, JLU, and Gladiator, engineered for lifted Jeeps, oversized tires, and hard trail use. This 8825-21 configuration runs a massive 1.75 inch heat treated 4130 chromoly Titan tie rod and DOM drag link with a Synergy tuned FOX 2.0 steering stabilizer, clamp, and mount stud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-21\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eTitan Series tie rod formed from 1.75\" x .188 wall heat treated 4130 chromoly for extreme strength and reliability\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop\u003c\/li\u003e\n\u003cli\u003eHeavy duty tie rod bent to clear the sway bar mounts, differential cover, and pitman arm, and supports stabilizer and hydro assist applications\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening\u003c\/li\u003e\n\u003cli\u003eIncludes a drag link flip adapter for high steer setups\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned FOX 2.0 steering stabilizer with clamp and mount stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x Titan Series Chromoly Tie Rod (8802-175)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-75)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (8806-01)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned FOX 2.0 Steering Stabilizer (6401-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket, and wheels with proper backspacing\u003c\/li\u003e\n\u003cli\u003eRequires a maximum wheel backspacing of 4.5 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications\u003c\/li\u003e\n\u003cli\u003eIf reusing the stock steering stabilizer or a stabilizer with 1\/2 inch mounting bolts, the Synergy 8807-03 Steering Stabilizer Relocation Kit is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808605470809,"sku":"8825-21","price":2016.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-21-MAIN-1200_1.jpg?v=1784918837"},{"product_id":"1987-2006-tj-lj-xj-zj-hd-steering-kit-stabilizer-clamp-syn8121-10","title":"1987-2006 TJ \/ LJ \/ XJ \/ ZJ HD Steering Kit with Stabilizer Clamp (8121-10)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA larger and stronger bolt in replacement for the factory steering on TJ, LJ, XJ, ZJ, and MJ Jeeps, with no drilling or reaming required. This 8121-10 kit uses a 1 3\/8 inch 4130 chromoly tie rod and a 1 3\/8 inch solid bar drag link with Synergy HD tie rod ends and a stabilizer clamp so you can add your choice of steering stabilizer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8121-10\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eTie rod made from 1 3\/8 inch 4130 chromoly, heat treated for maximum strength\u003c\/li\u003e\n\u003cli\u003eDrag link made from 1 3\/8 inch 1018 solid bar to eliminate deflection\u003c\/li\u003e\n\u003cli\u003eSynergy HD metal on metal tie rod ends, single plane at the drag link knuckle end to prevent steering flop\u003c\/li\u003e\n\u003cli\u003eY-style geometry modeled after the factory layout to minimize bump steer and help prevent death wobble\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve on the drag link and opposing thread tie rod allow alignment without removing the bars\u003c\/li\u003e\n\u003cli\u003e6061-T6 black anodized aluminum steering stabilizer clamp for a 1\/2 inch bolt stabilizer\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8121-02)\u003c\/li\u003e\n\u003cli\u003e1x Heat Treated Chromoly Tie Rod (8121-01)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-38)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFits vehicles with 2 to 6 inches of lift and requires a minimum of 2 inch front bump stop spacers\u003c\/li\u003e\n\u003cli\u003e2 to 4 inches of lift use the stock pitman arm; 4.5 to 6 inches require a drop pitman arm\u003c\/li\u003e\n\u003cli\u003eWheel backspacing: 15 inch wheel max 3.75 inches, 16 inch wheel max 4.00 inches, 17 inch wheel max 4.50 inches\u003c\/li\u003e\n\u003cli\u003eSome toe change is normal with this Y-style design and is no worse than the factory steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808945078361,"sku":"8121-10","price":1396.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8121-10-MAIN-1200.jpg?v=1784923266"},{"product_id":"1987-2006-tj-lj-xj-zj-hd-steering-kit-fox-ifp-stabilizer-syn8121-11","title":"1987-2006 TJ \/ LJ \/ XJ \/ ZJ HD Steering Kit with FOX IFP Stabilizer (8121-11)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA larger and stronger bolt in replacement for the factory steering on TJ, LJ, XJ, ZJ, and MJ Jeeps, with no drilling or reaming required. This 8121-11 configuration adds a Synergy tuned FOX IFP steering stabilizer and clamp on top of a 1 3\/8 inch 4130 chromoly tie rod and 1 3\/8 inch solid bar drag link with Synergy HD tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8121-11\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eTie rod made from 1 3\/8 inch 4130 chromoly, heat treated for maximum strength\u003c\/li\u003e\n\u003cli\u003eDrag link made from 1 3\/8 inch 1018 solid bar to eliminate deflection\u003c\/li\u003e\n\u003cli\u003eSynergy HD metal on metal tie rod ends, single plane at the drag link knuckle end to prevent steering flop\u003c\/li\u003e\n\u003cli\u003eY-style geometry modeled after the factory layout to minimize bump steer and help prevent death wobble\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve on the drag link and opposing thread tie rod allow alignment without removing the bars\u003c\/li\u003e\n\u003cli\u003e6061-T6 black anodized aluminum steering stabilizer clamp for a 1\/2 inch bolt stabilizer\u003c\/li\u003e\n\u003cli\u003eAbrasion resistant powder coat finish for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned FOX IFP steering stabilizer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8121-02)\u003c\/li\u003e\n\u003cli\u003e1x Heat Treated Chromoly Tie Rod (8121-01)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (4050-38)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned FOX IFP Steering Stabilizer (6401-00)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFits vehicles with 2 to 6 inches of lift and requires a minimum of 2 inch front bump stop spacers\u003c\/li\u003e\n\u003cli\u003e2 to 4 inches of lift use the stock pitman arm; 4.5 to 6 inches require a drop pitman arm\u003c\/li\u003e\n\u003cli\u003eWheel backspacing: 15 inch wheel max 3.75 inches, 16 inch wheel max 4.00 inches, 17 inch wheel max 4.50 inches\u003c\/li\u003e\n\u003cli\u003eSome toe change is normal with this Y-style design and is no worse than the factory steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43808945373273,"sku":"8121-11","price":1728.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8121-MAIN-1200-2_31c9f06f-cb34-4320-bc90-c46d21cfc62f.jpg?v=1784919021"},{"product_id":"2018-wrangler-jl-gladiator-jt-steering-correction-kit-syn8811-01","title":"2018-2025 Wrangler JL \/ Gladiator JT Steering Correction Kit (8811-01)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eRestore proper steering and suspension geometry on your lifted JL, JLU, or JT with the Synergy Steering Correction Kit. It relocates the drag link to the top of the steering knuckle and raises the axle side track bar mount 3.25 inches, flattening the drag link and track bar angles for more predictable steering, less bump steer, and a higher roll center.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8811-01\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eRelocates the drag link to the top of the steering knuckle and raises the axle side track bar mount 3.25 inches to correct geometry after a lift\u003c\/li\u003e\n\u003cli\u003eFlattens the drag link and track bar angles for more predictable steering and less bump steer\u003c\/li\u003e\n\u003cli\u003eRaises the vehicle roll center for improved stability and reduced body roll\u003c\/li\u003e\n\u003cli\u003eDrag link CNC formed from 1.5 inch x .250 wall USA made DOM tubing\u003c\/li\u003e\n\u003cli\u003eRelocation bracket built from 3\/16 and 1\/4 inch USA made steel\u003c\/li\u003e\n\u003cli\u003eIncludes the drag link flip adapter for an all in one steering correction system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (8800-01)\u003c\/li\u003e\n\u003cli\u003e1x Track Bar Relocation and Sector Shaft Correction Bracket (8855-01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for Jeeps running 3 inches of lift or more\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory track bar at 3 inches of lift; use an aftermarket adjustable track bar for lifts over 3 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThis product is covered by Synergy Manufacturing's Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Synergy MFG","offers":[{"title":"Default Title","offer_id":43809359036505,"sku":"8811-01","price":1101.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8811-MAIN-UPD-1200.jpg?v=1784919265"},{"product_id":"2013-ram-3500-ultimate-steering-system-rpm-2077","title":"2013+ Ram 3500 Ultimate Steering System (RPM-2077)","description":"\u003cp\u003eThis RPM Steering ultimate steering system replaces the factory steering linkage on your 2013 and newer Ram 3500 with a solid 2.25\" 7075 T6 aluminum tie rod link and a 2\" 7075 T6 aluminum drag link, paired with heavy duty forged tie rod ends that use carbon steel stud seats in place of the factory plastic seats. The built in anti-roll system keeps tie rod flop in check, and the exclusive Posi-Lock jam nut system with bellville washers keeps everything locked down under hard use. Every RPM link is backed by a lifetime bend or break warranty and the industry's only 36-month wear warranty. Choose bare aluminum or add the optional black powder coat finish.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty forged tie rod ends with a built in anti-roll system to reduce tie rod flop\u003c\/li\u003e\n\u003cli\u003eCarbon steel stud seats instead of the factory plastic seats\u003c\/li\u003e\n\u003cli\u003eExclusive Posi-Lock jam nut system with bellville washers\u003c\/li\u003e\n\u003cli\u003e2.25\" solid 7075 T6 USA aluminum tie rod link\u003c\/li\u003e\n\u003cli\u003e2\" solid 7075 T6 USA aluminum drag link\u003c\/li\u003e\n\u003cli\u003eRPM's lifetime bend or break warranty: \"You break it, we replace it.\"\u003c\/li\u003e\n\u003cli\u003eThe industry's only 36-month wear warranty\u003c\/li\u003e\n\u003cli\u003eAvailable in bare aluminum or optional black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePlease Note\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2013 was a split year for the Ram 3500. Be sure you have the later model year crossover steering before ordering.\u003c\/li\u003e\n\u003cli\u003eFits with the factory steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eFits with the Carli drop stabilizer kit.\u003c\/li\u003e\n\u003cli\u003eDual stabilizer fitment is yet to be determined.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation\u003c\/h6\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/rpm-2013-ram-2500-3500-steering-instructions.pdf?v=1786401249\" style=\"color: #8a051a; font-weight: bold;\" target=\"_blank\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"RPM Steering","offers":[{"title":"Bare Aluminum","offer_id":44512401424473,"sku":"RPM-2077","price":2029.99,"currency_code":"CAD","in_stock":true},{"title":"Black Powder Coat","offer_id":44512401457241,"sku":"RPM-2077-PC","price":2102.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/dodge_20ram_20full_20steering_20kit.png?v=1786396222"},{"product_id":"2014-ram-2500-ultimate-steering-system-rpm-2078","title":"2014+ Ram 2500 Ultimate Steering System (RPM-2078)","description":"\u003cp\u003eThis RPM Steering ultimate steering system replaces the factory steering linkage on your 2014 and newer Ram 2500 with a solid 2.25\" 7075 T6 aluminum tie rod link and a 2\" 7075 T6 aluminum drag link, paired with heavy duty forged tie rod ends that use carbon steel stud seats in place of the factory plastic seats. The built in anti-roll system keeps tie rod flop in check, and the exclusive Posi-Lock jam nut system with bellville washers keeps everything locked down under hard use. Every RPM link is backed by a lifetime bend or break warranty and the industry's only 36-month wear warranty. Choose bare aluminum or add the optional black powder coat finish.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty forged tie rod ends with a built in anti-roll system to reduce tie rod flop\u003c\/li\u003e\n\u003cli\u003eCarbon steel stud seats instead of the factory plastic seats\u003c\/li\u003e\n\u003cli\u003eExclusive Posi-Lock jam nut system with bellville washers\u003c\/li\u003e\n\u003cli\u003e2.25\" solid 7075 T6 USA aluminum tie rod link\u003c\/li\u003e\n\u003cli\u003e2\" solid 7075 T6 USA aluminum drag link\u003c\/li\u003e\n\u003cli\u003eRPM's lifetime bend or break warranty: \"You break it, we replace it.\"\u003c\/li\u003e\n\u003cli\u003eThe industry's only 36-month wear warranty\u003c\/li\u003e\n\u003cli\u003eAvailable in bare aluminum or optional black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePlease Note\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits with the factory steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eFits with the Carli drop stabilizer kit.\u003c\/li\u003e\n\u003cli\u003eDual stabilizer fitment is yet to be determined.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation\u003c\/h6\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/rpm-2013-ram-2500-3500-steering-instructions.pdf?v=1786401249\" style=\"color: #8a051a; font-weight: bold;\" target=\"_blank\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"RPM Steering","offers":[{"title":"Bare Aluminum","offer_id":44512401490009,"sku":"RPM-2078","price":2029.99,"currency_code":"CAD","in_stock":true},{"title":"Black Powder Coat","offer_id":44512401522777,"sku":"RPM-2078-PC","price":2102.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/dodge_20ram_20full_20steering_20kit_cb5adad5-f5d1-4c4b-9fbf-78c153202f9d.png?v=1786396225"},{"product_id":"2005-2016-superduty-steering-system-rpm-2087","title":"2005-2016 Superduty Steering System (RPM-2087)","description":"\u003cp\u003eThis RPM Steering steering system replaces the factory steering linkage on your 2005-2016 Ford Super Duty F-250\/F-350 with a solid 2.25\" 7075 T6 aluminum tie rod link and a 2\" 7075 T6 aluminum drag link, paired with heavy duty forged tie rod ends that use carbon steel stud seats in place of the factory plastic seats. The built in anti-roll system keeps tie rod flop in check, and the exclusive Posi-Lock jam nut system with bellville washers keeps everything locked down under hard use. Every RPM link is backed by a lifetime bend or break warranty and the industry's only 36-month wear warranty. Choose bare aluminum or add the optional black powder coat finish.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty forged tie rod ends with a built in anti-roll system to reduce tie rod flop\u003c\/li\u003e\n\u003cli\u003eCarbon steel stud seats instead of the factory plastic seats\u003c\/li\u003e\n\u003cli\u003eExclusive Posi-Lock jam nut system with bellville washers\u003c\/li\u003e\n\u003cli\u003e2.25\" solid 7075 T6 USA aluminum tie rod link\u003c\/li\u003e\n\u003cli\u003e2\" solid 7075 T6 USA aluminum drag link\u003c\/li\u003e\n\u003cli\u003eRPM's lifetime bend or break warranty: \"You break it, we replace it.\"\u003c\/li\u003e\n\u003cli\u003eThe industry's only 36-month wear warranty\u003c\/li\u003e\n\u003cli\u003eAvailable in bare aluminum or optional black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePlease Note\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits with the factory steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eDual stabilizer fitment is yet to be determined.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RPM Steering","offers":[{"title":"Bare Aluminum","offer_id":44512401850457,"sku":"RPM-2087","price":2029.99,"currency_code":"CAD","in_stock":true},{"title":"Black Powder Coat","offer_id":44512401883225,"sku":"RPM-2087-PC","price":2102.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ford_2005_20steering_20kit.png?v=1786396236"},{"product_id":"2017-superduty-steering-system-rpm-2088","title":"2017+ Superduty Steering System (RPM-2088)","description":"\u003cp\u003eThis RPM Steering steering system replaces the factory steering linkage on your 2017 and newer Ford Super Duty F-250\/F-350 with a solid 2.25\" 7075 T6 aluminum tie rod link and a 2\" 7075 T6 aluminum drag link, paired with heavy duty forged tie rod ends that use carbon steel stud seats in place of the factory plastic seats. The built in anti-roll system keeps tie rod flop in check, and the exclusive Posi-Lock jam nut system with bellville washers keeps everything locked down under hard use. Every RPM link is backed by a lifetime bend or break warranty and the industry's only 36-month wear warranty. Choose bare aluminum or add the optional black powder coat finish.\u003c\/p\u003e\u003ch6\u003eFeatures\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty forged tie rod ends with a built in anti-roll system to reduce tie rod flop\u003c\/li\u003e\n\u003cli\u003eCarbon steel stud seats instead of the factory plastic seats\u003c\/li\u003e\n\u003cli\u003eExclusive Posi-Lock jam nut system with bellville washers\u003c\/li\u003e\n\u003cli\u003e2.25\" solid 7075 T6 USA aluminum tie rod link\u003c\/li\u003e\n\u003cli\u003e2\" solid 7075 T6 USA aluminum drag link\u003c\/li\u003e\n\u003cli\u003eRPM's lifetime bend or break warranty: \"You break it, we replace it.\"\u003c\/li\u003e\n\u003cli\u003eThe industry's only 36-month wear warranty\u003c\/li\u003e\n\u003cli\u003eAvailable in bare aluminum or optional black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003ePlease Note\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits with the factory steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eDual stabilizer fitment is yet to be determined.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RPM Steering","offers":[{"title":"Bare Aluminum","offer_id":44512401915993,"sku":"RPM-2088","price":2029.99,"currency_code":"CAD","in_stock":true},{"title":"Black Powder Coat","offer_id":44512401948761,"sku":"RPM-2088-PC","price":2102.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/ford_2005_20steering_20kit_2586f8f3-b71b-45e8-adae-008a6f710152.png?v=1786396239"},{"product_id":"2018-2025-wrangler-jl-gladiator-jt-hd-steering-kit-with-king-stabilizer-8825-12","title":"2018-2025 Wrangler JL \/ Gladiator JT HD Steering Kit with KING Stabilizer (8825-12)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA complete bolt in replacement for the factory JL, JLU and Gladiator steering that eliminates bent tie rods, constant re-centering and death wobble. This 8825-12 configuration adds a Synergy tuned King 2.0 steering stabilizer with clamp and mount stud on top of a DOM drag link, a heat treated 4130 chromoly tie rod and forged Synergy single plane tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-12\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing.\u003c\/li\u003e\n\u003cli\u003eTie rod formed from 1.5\" x .188 wall heat treated 4130 chromoly, significantly stronger than OEM.\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop.\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening.\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish.\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools.\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned King 2.0 steering stabilizer with clamp and mount stud.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (\u003ca href=\"\/products\/synergy-2018-jeep-wrangler-jl-jlu-hd-drag-link\"\u003e8800-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x HD Adjustable Chromoly Tie Rod (\u003ca href=\"\/products\/2018-wrangler-jl-gladiator-jt-hd-chromoly-tie-rod-syn8802-11\"\u003e8802-11\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (\u003ca href=\"\/products\/synergy-jeep-jk-steering-stabilizer-tie-rod-clamp-1-1-2in-for-1-50in-od-tie-rods\"\u003e4050-50\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (\u003ca href=\"\/products\/synergy-2007-jeep-wrangler-jk-jku-jl-jlu-track-bar-steering-stabilizer-mount-stud\"\u003e8806-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned King 2.0 Steering Stabilizer (\u003ca href=\"\/products\/2007-2025-wrangler-gladiator-synergy-tuned-king-2-0-steering-stabilizer-6410-01\"\u003e6410-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location.\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket and wheels with proper backspacing.\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synergy Mfg","offers":[{"title":"Default Title","offer_id":44582716211289,"sku":"8825-12","price":2152.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-11-MAIN-1200_9e8d289e-7e2e-4e04-8def-69ed33712556.jpg?v=1787782353"},{"product_id":"2018-2025-wrangler-jl-gladiator-jt-titan-series-hd-steering-kit-with-king-stabilizer-8825-22","title":"2018-2025 Wrangler JL \/ Gladiator JT Titan Series HD Steering Kit with KING Stabilizer (8825-22)","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA complete bolt in replacement for the factory JL, JLU and Gladiator steering that eliminates bent tie rods, constant re-centering and death wobble. This 8825-22 configuration adds a Synergy tuned King 2.0 steering stabilizer with clamp and mount stud on top of a DOM drag link, the Titan Series tie rod and forged Synergy single plane tie rod ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8825-22\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDrag link precision bent from 1.5\" x .250 wall USA made DOM tubing.\u003c\/li\u003e\n\u003cli\u003eTitan Series tie rod built for the highest strength and clearance in the JL and JT platform.\u003c\/li\u003e\n\u003cli\u003eForged Synergy metal on metal tie rod ends with grease fittings and replaceable dust boots, single plane to eliminate drag link and tie rod flop.\u003c\/li\u003e\n\u003cli\u003eDouble Adjuster Sleeve and pinch bolt design allow alignment in the vehicle and prevent jam nut loosening.\u003c\/li\u003e\n\u003cli\u003eTwo stage abrasion resistant powder coat finish.\u003c\/li\u003e\n\u003cli\u003e100 percent bolt on installation with basic hand tools.\u003c\/li\u003e\n\u003cli\u003eIncludes a Synergy tuned King 2.0 steering stabilizer with clamp and mount stud.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x HD Adjustable Drag Link (\u003ca href=\"\/products\/synergy-2018-jeep-wrangler-jl-jlu-hd-drag-link\"\u003e8800-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Titan Series Tie Rod (\u003ca href=\"\/products\/2018-wrangler-jl-gladiator-jt-titan-series-tie-rod-syn8802-175\"\u003e8802-175\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Clamp (\u003ca href=\"\/products\/universal-steering-stabilizer-tie-rod-clamp-1-3-4-for-1-625-od-tie-rods-syn4050-75\"\u003e4050-75\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Steering Stabilizer Mount Stud (\u003ca href=\"\/products\/synergy-2007-jeep-wrangler-jk-jku-jl-jlu-track-bar-steering-stabilizer-mount-stud\"\u003e8806-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Synergy Tuned King 2.0 Steering Stabilizer (\u003ca href=\"\/products\/2007-2025-wrangler-gladiator-synergy-tuned-king-2-0-steering-stabilizer-6410-01\"\u003e6410-01\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eNo additional requirements for installation in the stock location.\u003c\/li\u003e\n\u003cli\u003eWe do not recommend flipping the drag link for lifts less than 3 inches. High steer requires 3 inch bump stop spacers, a front track bar relocation bracket and wheels with proper backspacing.\u003c\/li\u003e\n\u003cli\u003eCompatible with right hand drive applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synergy Mfg","offers":[{"title":"Default Title","offer_id":44582718603353,"sku":"8825-22","price":2188.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/8825-21-MAIN-1200_1_1c21986e-c78f-43e1-bcc1-2ae1de799293.jpg?v=1787782349"}],"url":"https:\/\/dirtygarage.com\/collections\/steering-racks.oembed?page=3","provider":"Dirty Garage","version":"1.0","type":"link"}