{"product_id":"2011-2020-superduty-6-5-lift-kit-1-piece-drive-shaft-w-o-shocks-49-2765","title":"2011-2020 Superduty 6.5\" Lift Kit 1 Piece Drive Shaft w\/o Shocks (49-2765)","description":"\u003cp\u003eThe ReadyLIFT 6.5 inch Big Lift Kit for 2017-2018 Ford Super Duty Diesel trucks is a comprehensive suspension solution that provides the clearance needed for massive 38 inch tires. Featuring heavy duty radius arm drop brackets and a forged dropped pitman arm, this system corrects vital steering and suspension geometry for a factory like feel. The kit includes specialized components for one piece drive shaft models, including a transfer case clocking ring and a heavy duty transmission crossmember, ensuring your truck remains smooth and stable at highway speeds.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eRadius arm drop brackets maintain factory caster geometry for precise steering and handling.\u003c\/li\u003e\n\u003cli\u003eIncludes a transfer case clocking ring and heavy duty transmission crossmember to optimize one piece drive shaft angles.\u003c\/li\u003e\n\u003cli\u003eForged dropped pitman arm and track bar relocation bracket ensure accurate steering and centered axle alignment.\u003c\/li\u003e\n\u003cli\u003eEngineered front coil springs provide a full 6.5 inches of lift specifically for the Power Stroke diesel engine.\u003c\/li\u003e\n\u003cli\u003eFabricated steel rear lift blocks provide a leveled stance while preserving the trucks original towing capacity.\u003c\/li\u003e\n\u003cli\u003eHeavy duty 3\/16 inch plate steel front skid plate offers essential protection for the differential and underbody.\u003c\/li\u003e\n\u003cli\u003eSway bar drop brackets and bump stop extensions maintain proper suspension travel and component clearance.\u003c\/li\u003e\n\u003cli\u003eExtended brake line brackets allow for full suspension articulation without tension on factory lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is engineered specifically for trucks equipped with a one piece drive shaft only.\u003c\/li\u003e\n\u003cli\u003eVehicle alignment and headlamp aim must be adjusted following the installation for safety.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is highly recommended due to the complexity of the transfer case clocking and suspension overhaul.\u003c\/li\u003e\n\u003cli\u003eEstimated installation time is approximately 6 to 8 hours excluding alignment and tire assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eCompatibility Notes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2017 to 2018 Ford Super Duty F250 and F350 4WD Diesel trucks.\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for Single Rear Wheel (SRW) models with a one piece drive shaft.\u003c\/li\u003e\n\u003cli\u003eNot compatible with gasoline powered trucks or 2WD models.\u003c\/li\u003e\n\u003cli\u003eDoes not fit trucks with a two piece drive shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eTire Fitment\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Tire Diameter: 38 inches.\u003c\/li\u003e\n\u003cli\u003eRecommended Setup: 38x13.50 tires on a 9 inch wide wheel with a 0 offset.\u003c\/li\u003e\n\u003cli\u003eTrimming of the front valance and inner fender liner may be required for full clearance with 38 inch tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eShock Specs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eShock Type: ReadyLIFT SST3000 Series Performance Dampers (or compatible Bilstein\/Falcon options depending on sub-configuration).\u003c\/li\u003e\n\u003cli\u003eDesign: Twin tube gas charged construction for consistent performance and durability.\u003c\/li\u003e\n\u003cli\u003eValving: Performance tuned specifically for the weight and dynamics of the Ford Super Duty diesel platform.\u003c\/li\u003e\n\u003cli\u003eFinish: Durable painted finish with included dust boots to protect the shafts from road debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Height: 6.5 inches.\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 inches.\u003c\/li\u003e\n\u003cli\u003eKit Contents: Front Coil Springs, Radius Arm Drop Brackets, Dropped Pitman Arm, Track Bar Relocation Bracket, Clocking Ring, Transmission Crossmember, Sway Bar Drops, Bump Stop Extensions, Fabricated Rear Blocks, and SST3000 Shocks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":42932059373657,"sku":"49-2765","price":1910.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/RL-6-5-BIG-LIFT-KIT-FORD.png?v=1766165757","url":"https:\/\/dirtygarage.com\/products\/2011-2020-superduty-6-5-lift-kit-1-piece-drive-shaft-w-o-shocks-49-2765","provider":"Dirty Garage","version":"1.0","type":"link"}