{"product_id":"2019-2023-gm-1500-icon-front-and-rear-lift-kit-k73063","title":"2019-2023 GM 1500 Front and Rear Lift Kit (ICOK73063)","description":"\u003cp\u003eLevel up your 2019-2023 GM 1500 with this complete ICON suspension system. 1.5-3.5\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable coilovers provide 1.5-3.5\" of front lift height\u003c\/li\u003e\n  \u003cli\u003eIncreased lift height allows for fitment of larger and more aggressive tires\u003c\/li\u003e\n  \u003cli\u003eFits 2WD\/4WD applications\u003c\/li\u003e\n  \u003cli\u003eUp to 35% increase in front wheel travel over stock\u003c\/li\u003e\n  \u003cli\u003eICON shocks feature vehicle specific tune for superior performance and ride quality\u003c\/li\u003e\n  \u003cli\u003e2.5 Series coilover shocks feature corrosion resistant CAD plated shock body with 7\/8\" shaft\u003c\/li\u003e\n  \u003cli\u003e2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003e7.5\" aluminum reservoirs provide generous oil and nitrogen volume for consistent damping as shock temperature increases\u003c\/li\u003e\n  \u003cli\u003eFK Rod End bearings provide extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eShocks are fully rebuildable and revalvable\u003c\/li\u003e\n  \u003cli\u003eICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 billet aluminum upper control arms allow for on-vehicle camber and caster adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.00\" Backspace \/ 0mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: Recommended Aftermarket Tires (Silverado): 35\"x12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n  \u003cli\u003eTires: Recommended Aftermarket Tires (Sierra): 34\"x12.00\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eThese Systems Are To Be Used With Aftermarket Upper Control Arms Only\u003c\/li\u003e\n  \u003cli\u003eSlight Modifications To Factory Shock Mounts May Be Required\u003c\/li\u003e\n  \u003cli\u003eShocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle\u003c\/li\u003e\n  \u003cli\u003eTrimming Of The Upper Control Arm Stop Required Or Down Travel Will Be Limited By Upper Arm Stop\u003c\/li\u003e\n  \u003cli\u003eMinor Trimming Required For Recommended Tire Size\u003c\/li\u003e\n  \u003cli\u003eNot compatible with models equipped with Adaptive Ride Control (ARC)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with models equipped with 4-cylinder engine\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Silverado 1500 ZR2 or Sierra 1500 AT4X sub-models\u003c\/li\u003e\n  \u003cli\u003eModels equipped with Duramax 6-cylinder diesel engine will have lift height adjustment range reduced by approximately .5\"\u003c\/li\u003e\n  \u003cli\u003eIncluded rear shocks are compatible with 0-2\" of rear lift on most models. Rear shocks are not recommended with any additional rear lift on Silverado 1500 Trail Boss and Sierra 1500 AT4.\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado Trail Boss and GMC Sierra 1500 AT4 lift height range 0-1.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eRecommend replacing OE rear blocks on Silverado 1500 Trail Boss and Sierra 1500 AT4 models with 1\" rear blocks if level stance is desired. See ICON part numbers 51001 and 52050.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with models equipped with torsion bar front springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eICON Vehicle Dynamics 2019-2023 GM Silverado\/Sierra 1500 suspension systems are designed to dramatically increase on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the GM platform’s suspension and addressed any areas where performance could be extracted. The Stage 3 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring a remote reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel\" through the range of travel. These coilovers are also height adjustable from 1.5-3.5\" of lift over stock allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.5 Aluminum Series piggyback reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2019-2023 GM Silverado\/Sierra 1500 Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt. This system features billet aluminum upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159909269593,"sku":"ICOK73063","price":6875.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/86e7fa288aa0f563bc73217d8d66a6be.jpg?v=1773863222","url":"https:\/\/dirtygarage.com\/products\/2019-2023-gm-1500-icon-front-and-rear-lift-kit-k73063","provider":"Dirty Garage","version":"1.0","type":"link"}