{"product_id":"2020-2026-gm-2500-3500hd-6-5-no-torsion-bar-drop-system-lift-kit-bds753h","title":"2020-2025 GM HD 6.5\" Lift Kit with NX2 Nitro Shocks (BDS753H)","description":"\u003cp\u003eThis BDS 6.5\" lift kit takes your 2020-2025 Chevy Silverado \/ GMC Sierra 2500 HD 4WD to the next level, with clearance for up to 38\" tires. BDS uses a No Torsion Bar Drop System, mounting the torsion bars to the top of the lower a-arm to maximize ground clearance. Up front it runs torsion bar relocation brackets, high-arched 1\/4\" steel crossmembers, multipiece differential relocation brackets, HD skid plates and CNC-machined ductile iron steering knuckles, plus sway bar drops and stainless brake lines. The rear uses replacement lift blocks, u-bolts, and brake line and ABS line relocation brackets to retain the factory lines. This kit ships with NX2 Nitro shocks: nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance design with no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eBrake line and ABS line relocation brackets allow use of factory lines\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eChoice of NX2, FOX 2.0 or FOX 2.5 gas shocks for improved performance\u003c\/li\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Cross-Member\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6.5 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eRecommended Tire \u0026amp; Wheel Fitment\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eTire Size: 37x12.5, 38x13.5\u003c\/li\u003e\n\u003cli\u003eWheel Diameter: 18x9, 20x9\u003c\/li\u003e\n\u003cli\u003eBack Spacing: 4.625\/6.18\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option.\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eTorsion bar tool required to load\/unload torsion bars; the GM-specified tool is #CH48809.\u003c\/li\u003e\n\u003cli\u003eModels with two-piece rear driveshafts will require a carrier bearing drop kit.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 inch wheels cannot be reinstalled due to tie rod end interference; stock 20 inch wheels can be reinstalled with up to a 35x12.50 tire.\u003c\/li\u003e\n\u003cli\u003eVehicles regularly used in 4WD on the highway could experience a minor front driveline vibration; if so, replace the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eDo not install this system in conjunction with any type of torsion bar lift keys to achieve more than the tested 6.5 inch lift height.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/tire combinations (typically the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance). Deeper backspacing and shorter\/narrower tires reduce trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eIncludes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBDS011516, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Rear Box Kit w\/o Overloads (UPC 658848611911)\u003c\/li\u003e\n\u003cli\u003eBDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv (UPC 658848615179)\u003c\/li\u003e\n\u003cli\u003eBDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass (UPC 658848615186)\u003c\/li\u003e\n\u003cli\u003eBDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 1of2 (UPC 658848615193)\u003c\/li\u003e\n\u003cli\u003eBDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Front Box Kit 2of2 (UPC 658848615209)\u003c\/li\u003e\n\u003cli\u003eBDS021694, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 Inch Box Kit (UPC 658848615216)\u003c\/li\u003e\n\u003cli\u003eBDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit (UPC 658848619276)\u003c\/li\u003e\n\u003cli\u003eBDS85621, Shock - 21.41 x 13.59 x 2-3\/8 EB1 \/ EB1 (UPC 711745609419)\u003c\/li\u003e\n\u003cli\u003eBDS85769, Shock- 30.95 x 18.15 x 2-3\/8 - EB1\/EB1 (UPC 711745609761)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684397224025,"sku":"BDS753H","price":3589.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_gm_753H_756H.jpg?v=1758726871","url":"https:\/\/dirtygarage.com\/products\/2020-2026-gm-2500-3500hd-6-5-no-torsion-bar-drop-system-lift-kit-bds753h","provider":"Dirty Garage","version":"1.0","type":"link"}