{"product_id":"2020-2026-gm-2500hd-3500hd-6-5-coilover-conversion-bds756fpe","title":"2020-2025 GM HD 6.5\" FOX 2.0 Performance Conversion Kit (BDS756FPE)","description":"\u003cp\u003eThis BDS 6.5\" lift kit with FOX 2.5 Coil-Over conversion is a game changer for your 2020-2025 Chevy Silverado \/ GMC Sierra 2500 HD, with clearance for up to 38\" tires. In addition to replacing the factory torsion bars, the control arms are upgraded: tubular uppers from 1.5\" OD x .120-wall fully TIG-welded tubing with an indexed ball joint cup, and fully boxed, internally gusseted high-strength steel lowers. Up front it also runs high-arched 1\/4\" steel crossmembers, multipiece differential relocation brackets, HD skid plates and CNC-machined ductile iron steering knuckles. The rear uses replacement lift blocks, a u-bolt flip kit for max clearance and FOX 2.0 Performance shocks. The bolt-on FOX 2.5 remote-reservoir shocks are race-proven and tune out of the box, with a Dual Speed Compression adjuster offering 10 low-speed and 12 high-speed compression levels.\u003c\/p\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-overs for improved damper performance over stock\u003c\/li\u003e\n\u003cli\u003eDual Speed Compression adjuster for high-speed and low-speed compression tuning\u003c\/li\u003e\n\u003cli\u003ePerformance tubular UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eFully boxed and internally gusseted high-strength lower control arms\u003c\/li\u003e\n\u003cli\u003eHigh clearance design with no torsion bar drop maximizes ground clearance\u003c\/li\u003e\n\u003cli\u003eRobust steering knuckles maintain ESC system compliance\u003c\/li\u003e\n\u003cli\u003eHD skid plate system for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eMultipoint differential relocation brackets secure the front axle and improve CV angles\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6.5 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 5 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eNotes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eModels with two-piece rear drive shafts will require a carrier bearing drop kit (BDS121612).\u003c\/li\u003e\n\u003cli\u003eRequires frame bracket modification.\u003c\/li\u003e\n\u003cli\u003eDisassembly\/assembly of the factory torsion bar system requires the GM-specified unloading tool #CH48809.\u003c\/li\u003e\n\u003cli\u003eCompatible with diesel models ONLY. Works with standard or AT4 diesel models.\u003c\/li\u003e\n\u003cli\u003eSome minor trim will be required with certain wheel\/tire combinations (typically the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance). Deeper backspacing and shorter\/narrower tires reduce trimming.\u003c\/li\u003e\n\u003cli\u003eFactory 17-18 inch wheels cannot be reinstalled due to tie rod end interference; stock 20 inch wheels can be reinstalled with up to a 37x12.50 tire.\u003c\/li\u003e\n\u003cli\u003eVehicles regularly used in 4WD on the highway could experience a minor front driveline vibration; if so, replace the front driveshaft with a dual Cardan style driveshaft.\u003c\/li\u003e\n\u003cli\u003eCoilover coil has a large amount of preload; a coil spring compressor must be used to remove the coil from the coilover. Failure to use one may result in death or injury.\u003c\/li\u003e\n\u003cli\u003eDo not increase coilover preload.\u003c\/li\u003e\n\u003cli\u003eFor DRW models, use the w\/ overload rear lift option.\u003c\/li\u003e\n\u003cli\u003eWill NOT work with AT4X or ZR2 models (lower control arm profile is different).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eIncludes\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBDS011526, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 6.5 inch Rear Box Kit w\/ Overloads (UPC 658848611959)\u003c\/li\u003e\n\u003cli\u003eBDS021303, 2020-2024 GM HD LCA Kit - Drv (UPC 711745611894)\u003c\/li\u003e\n\u003cli\u003eBDS021304, 2020-2024 GM HD LCA Kit - Pass (UPC 711745611900)\u003c\/li\u003e\n\u003cli\u003eBDS021690, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Drv (UPC 658848615179)\u003c\/li\u003e\n\u003cli\u003eBDS021691, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Knuckle Box Kit - Pass (UPC 658848615186)\u003c\/li\u003e\n\u003cli\u003eBDS021692, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 1of2 (UPC 658848615193)\u003c\/li\u003e\n\u003cli\u003eBDS021693, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Front Box Kit 2of2 (UPC 658848615209)\u003c\/li\u003e\n\u003cli\u003eBDS121301, 2020-2024 GM HD Coil Over Conversion UCA Kit (UPC 711745612051)\u003c\/li\u003e\n\u003cli\u003eBDS121661, 2020-2024 Chevrolet Silverado\/GMC Sierra 2500\/3500 HD 5 inch-6.5 inch Skid Plate Box Kit (UPC 658848619276)\u003c\/li\u003e\n\u003cli\u003eBDS121663, 2020-2024 GM HD Coil Over Conversion Kit - 6.5 inch (UPC 711745612099)\u003c\/li\u003e\n\u003cli\u003eFOX88406339, Kit: 20+ GM 2500\/3500 HD Front Coilover, 2.5 Series, R\/R 6.5 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eFOX98224767, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS","offers":[{"title":"Default Title","offer_id":42684396830809,"sku":"BDS756FPE","price":11118.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/bds_gm_753FPE_756FPE_01.jpg?v=1758726869","url":"https:\/\/dirtygarage.com\/products\/2020-2026-gm-2500hd-3500hd-6-5-coilover-conversion-bds756fpe","provider":"Dirty Garage","version":"1.0","type":"link"}