{"product_id":"2023-superduty-icon-2-5-front-and-rear-lift-kit-k62594l","title":"2023 Superduty 2.5 Front and Rear Lift Kit (ICOK62594L)","description":"\u003cp\u003eLevel up your 2023 Superduty with this complete ICON suspension system. 2.5\" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON engineered dual rate coil springs provide 2.5\" of front lift over stock\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned remote reservoir front and piggyback reservoir rear 2.5 Aluminum Series shocks\u003c\/li\u003e\n  \u003cli\u003eFront and rear shocks equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n  \u003cli\u003eOn-vehicle adjustable track bar for optimum front axle centering and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eApplication specific alignment cams ensure proper caster alignment\u003c\/li\u003e\n  \u003cli\u003eLeaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap\u003c\/li\u003e\n  \u003cli\u003eIncreased wheel travel and improved ride quality over stock with no change in towing capacity\u003c\/li\u003e\n  \u003cli\u003eLess body-roll than stock\u003c\/li\u003e\n  \u003cli\u003eLifetime guarantee that springs won’t sag or break\u003c\/li\u003e\n  \u003cli\u003eNo drive shaft modifications required\u003c\/li\u003e\n  \u003cli\u003eShocks are fully rebuildable and re-tunable\u003c\/li\u003e\n  \u003cli\u003e100% Bolt-on system - no drilling, cutting or welding necessary for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWheel \u0026amp; Tire Recommendations\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eICON Alloys - 17x8.5\" w\/ 5\" Backspace \/ 6mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 18x9\" w\/ 5.25\" Backspace \/ 6mm Offset\u003c\/li\u003e\n  \u003cli\u003eICON Alloys - 20x9\" w\/ 5.25\" Backspace \/ 6mm Offset\u003c\/li\u003e\n  \u003cli\u003eTires: 35\" x 12.50\" (37\" x 12.50\" tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eOnly fits 4WD models\u003c\/li\u003e\n  \u003cli\u003eWill not fit F-350\/F-450 Cab \u0026amp; Chassis models\u003c\/li\u003e\n  \u003cli\u003eRare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split\u003c\/li\u003e\n  \u003cli\u003eFits Single Rear Wheel Models Only\u003c\/li\u003e\n  \u003cli\u003eRequires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/li\u003e\n  \u003cli\u003eSprings Are Rated For Gasoline Engines\u003c\/li\u003e\n  \u003cli\u003eLift Heights Based On 4WD Crew Cab Gas\u003c\/li\u003e\n  \u003cli\u003eIf equipped with Dynamic Bending Headlamps and\/or Onboard scales part # 611081 is also required\u003c\/li\u003e\n  \u003cli\u003eReduction in rear spring rate may reduce accuracy of OnBoard Scales, if equipped\u003c\/li\u003e\n  \u003cli\u003eWill not fit 2024 models\u003c\/li\u003e\n  \u003cli\u003eReplaces OE rear blocks for .5\" of rear lift over stock on F-250. Lowers F-350 rear ride height by .5\" compared to stock.\u003c\/li\u003e\n  \u003cli\u003eTrucks equipped with Tremor package with have front lift height of 1.5\" over stock\u003c\/li\u003e\n  \u003cli\u003eBrake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)\u003c\/li\u003e\n  \u003cli\u003eICON track bar bracket part # 64039 is also recommended to correct bump steer geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eManufacturer Description\u003c\/h6\u003e\n\u003cp\u003eThe ICON 2.5\" suspension system is a great way to lift your 4WD 2023 Ford F-250\/F-350 Super Duty while improving ride quality and performance. This upgraded Stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. Also included in this stage is ICON's CDC Valve front and rear shocks, for those desiring an easy way to tune the ride externally with 10 settings, from soft to hard. ICON's Stage 4 System is comprised of dual rate coil springs optimized for trucks equipped with gasoline engines, 2.5 Aluminum Series CDCV remote reservoir front and CDCV piggyback reservoir rear shocks, adjustable front track bar with massive FK rod end, alignment cams for adding caster, and rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap. ICON 2.5\" remote reservoir and piggyback reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":43159954948185,"sku":"ICOK62594L","price":7371.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8030\/9593\/files\/5a1f4a4a3c585af2dfed2e515cba6e6e.jpg?v=1773864075","url":"https:\/\/dirtygarage.com\/products\/2023-superduty-icon-2-5-front-and-rear-lift-kit-k62594l","provider":"Dirty Garage","version":"1.0","type":"link"}