2024-2026 Tacoma/Land Cruiser Intercooler and Charge Pipe Kit, Black Core, Red Pipes (MMINT-TAC-24KBKRD)

Description

Mishimoto Intercooler and Charge Pipe Kit for the 2024-2026 Tacoma/Land Cruiser. It replaces the factory tube-and-fin intercooler on the 2.4L turbo four-cylinder with a 55 percent larger bar-and-plate core that holds charge air temperatures down through repeated hard pulls, towing grades and long trail days.

Mishimoto measured intake air temperatures up to 36 F lower at wide-open throttle and 30 percent less pressure drop than stock, so the turbo works less to make the same boost. Cast end tanks and billet aluminum ORB sensor ports replace the weaker factory construction, and OEM-matched mounting bushings plus the included crush washer give a sealed, rattle-free install. Nothing has to be relocated, Toyota's adaptive cruise control keeps working, and this kit adds Mishimoto's aluminum charge pipes, DuraCore couplers and constant-tension clamps so the whole charge air path from turbo to throttle body is upgraded in one purchase.

Features

• 55% larger bar-and-plate core than stock
• Up to 36 F cooler intake air at wide-open throttle (Mishimoto test)
• 30% less pressure drop than the factory intercooler
• Cast end tanks with billet aluminum ORB sensor ports
• No sensor relocation; adaptive cruise control retained
• Aluminum hot-side and cold-side charge pipes in wrinkle red
• DuraCore reinforced couplers and constant-tension clamps
• Custom shroud sends airflow across the whole core
• Mishimoto Lifetime Warranty

Notes

• Fits the 2024 and newer Tacoma and the 2024 and newer Land Cruiser (250 series) with the 2.4L turbo.
• On the Land Cruiser a bracket on top of the AC condenser may have to be removed for installation.
• Core 24.13 x 8.87 x 3.5 inches; rated for up to 50 psi of boost.