2025-2026 4Runner / 2024-2026 Land Cruiser 3" SST3.3 Lift Kit w/ Falcon 3.3 Fast Adjust Shocks & Forged Upper Control Arms (62-55366)

Description

ReadyLIFT's 3" SST3.3 Suspension System for the 2025-2026 Toyota 4Runner and 2024-2026 Land Cruiser brings Falcon 3.3 Fast Adjust damping together with ReadyLIFT's new forged aluminum upper control arms. From highway cruising to rocky backroads, it delivers adjustable ride control, confident handling and a stance ready for larger tires.

Part Number: 62-55366

Features

• 3" front lift for larger tires and improved clearance
• Falcon 3.3 Fast Adjust reservoir struts and shocks: a 3-position main compression knob (Soft, Custom, Firm) plus an 8-position Micro Adjust dial to fine-tune the Custom setting
• Monotube reservoir dampers with Red Line oil for consistent performance on and off pavement
• Forged aluminum upper control arms, stronger and more rigid than ReadyLIFT's previous tubular steel arms
• Corrected arm geometry and optimized component clearance support proper alignment and suspension travel at lifted ride height
• Pro Series heavy-duty high-angle ball joints allow more articulation while keeping a factory-like ride
• Maintenance-free Terrain Control Technology (TCT) pivot bushings stay quiet without routine lubrication
• Type III hard-anodized finish, billet aluminum O-ring dust caps and sealed ball joint assemblies keep out corrosion, dirt and debris

Tire Fitment:

• Up to 285/75R17 on an 8" wide, +35 offset wheel with no trimming
• Up to 295/55R20 on an 8.5" wide, +35 offset wheel with no trimming
• 315/70R17 or 35x12.50R17 with minor trimming
• Fitment is based on Wheel Pros wheels and Nitto tires. Test fit every wheel and tire combination before installing.

Includes

• Forged aluminum upper control arms, left and right
• Falcon 3.3 Fast Adjust front coilovers
• Falcon 3.3 Fast Adjust rear shocks, left and right
• Rear coil springs
• Front sway bar extensions and front bump stop extensions
• Front skid plate
• Front differential drop brackets, spacers and bushings
• Falcon bump stops and rear bump stop extensions
• Rear sway bar bracket and rear brake line bracket
• Crush sleeves, washers and hardware pack

Notes

• Not compatible with TRD Pro or Trailhunter models.
• Estimated installation time is about 7 hours, excluding alignment and wheel and tire assembly. Installation by a certified mechanic is recommended.
• An alignment is required after installation. Headlamp aim and any ADAS cameras or sensors should also be checked and adjusted.