Extreme Duty Kinetic Energy Rope 7/8 in x 30 ft (00068)

A 7/8 in x 30 ft double braided nylon kinetic recovery rope sized for Jeeps, mid-size trucks and SUVs between 4,000 and 6,500 lb GVW. It stretches up to 30 percent of its length to store energy for a snatch recovery, carries a 28,300 lb minimum breaking strength and wears a urethane polymer coating with rubberized eyes to shrug off abrasion, UV and moisture.

Features

• Stretches up to 30 percent of its length to build kinetic energy for pulls out of sand, mud and snow.
• 100 percent double braided nylon construction.
• Flexible weather resistant polymer coating guards against abrasion, UV and water uptake.
• Rubberized rope eyes protect the loops at the highest wear points.
• Minimum breaking strength 28,300 lb with a 5,660 lb working load limit.
• Loop ends at both ends for soft shackle or hard shackle connections.
• Made and tested in the USA.

Specifications

• Diameter: 7/8 in
• Length: 30 ft
• Minimum breaking strength: 28,300 lb
• Working load limit: 5,660 lb
• Stretch: up to 30 percent
• Material: double braided nylon with urethane polymer coating
• End type: loop
• Colour: Red
• Rated for vehicles 4,000 to 6,500 lb GVW
• Sleeve: not included

Match the rope to the lighter vehicle in the recovery: a typical truck or SUV wants a minimum breaking strength of four to six times its gross vehicle weight rating, while very heavy expedition trucks can run a two to four times ratio. Too light a rope risks breakage and too heavy a rope will not stretch enough to give you the kinetic assist.