FlatLink XTV Winch Shackle Mount Red (00070-01)

The FlatLink XTV in Red swaps the hook on an ATV or UTV winch for a proper screw pin shackle connection, so strap loops stay captured through every slack and tension cycle of a pull. It is machined from 6000 series billet aluminum with a 7/16 in titanium double shear pin, carries an 8,000 lb maximum load rating and installs in minutes with no splicing on steel cable or synthetic rope up to 5/16 in.

Features

• Replaces a hook on an ATV or UTV winch with a secure screw pin shackle or D-ring connection.
• No splicing needed, works on steel cable or synthetic rope up to 5/16 in.
• A 7/16 in 6Al-4V titanium double shear pin with an inner snap ring holds the line eye.
• Snap ring pops off in seconds for pin removal and line changes.
• Oval opening accepts the pin or bow end of 1/2 in and 5/8 in screw pin shackles, and the pin end of 3/4 in shackles.
• EPDM rubber guard held by four barbed tips cushions the line when stowed and protects alloy fairleads.
• Stows flat against roller or hawse fairleads and ends hook rattle.
• Machined from 6000 series billet aluminum with 6Al-4V titanium hardware.
• 8,000 lb maximum load rating with an ultimate failure above 28,000 lb.
• Suits closed-system winching rigs built entirely from closed-link hardware.
• Protected by US utility patent 9,388,025, made in the USA.

Specifications

• Colour: Red
• Material: 6000 series billet aluminum, 6Al-4V titanium pin
• Shear pin diameter: 7/16 in
• Winch line: steel cable or synthetic rope up to 5/16 in
• Shackle sizes: 1/2 in and 5/8 in (pin or bow), 3/4 in (pin end)
• Maximum load rating: 8,000 lb
• Ultimate failure: 28,000 lb plus
• Weight: 12.7 oz