Rope Retention Pulley XTV and 10 in Soft Shackle Combo (00265)

This powersports combo pairs the Rope Retention Pulley XTV for 3/16 to 1/4 in synthetic rope with a 10 in Standard Duty soft shackle, giving UTV and ATV winches a complete 12,000 lb WLL redirect or double line kit at 8.1 oz for the pulley. The patented rubber retention fingers hold the rope in the groove through slack, so nothing jumps the groove on a quick reset.

Features

• Bundles the powersports Rope Retention Pulley XTV with a 10 in Standard Duty soft shackle
• Patented rubber retention fingers keep synthetic rope in the groove when the line goes slack
• Doubles the pull of a UTV or ATV winch or redirects the line without a heavy snatch block
• Oversized hole radius gives the soft shackle a smooth bearing surface and keeps its legs off the edges
• Critical friction surface is PTFE treated for slickness and heat dissipation
• Pulley is billet machined 6000 series aluminum with a Mil-A-8625 F hard anodized surface
• No pinch points, so fewer crushed fingers during rigging
• For synthetic rope only
• Made in the USA

Specifications

• Pulley rope compatibility: synthetic rope 3/16 to 1/4 in (5 to 7 mm)
• Pulley working load limit: 12,000 lb (57.8 kN)
• Pulley weight: 8.1 oz (230 g)
• Pulley colour and finish: gray, hard anodized
• Soft shackle: Standard Duty, 10 in, no sleeve

A friction pulley does lose some efficiency, roughly 10 to 20 percent depending on load, so it will not match a bearing snatch block for pure mechanical advantage. What you get instead is a pulley you can rig in seconds, with no pinch points for fingers, that keeps the rope captured in the groove when the line goes slack, and weighs a fraction of a steel block.