2019-2026 Ram 1500 Outlaw Rear Bumper Textured Black (58-81075)

Read this first: this bumper is NOT compatible with the OEM hitch. Westin offers hitch 58-81075H separately to replace the factory hitch and work with this bumper, and the factory hitch bolts come out as part of the installation. If you tow, plan for that replacement hitch before you order. With that out of the way, the Outlaw rear bumper is one of the most transformative things you can bolt to the back of a DT Ram 1500. It ditches the soft factory look for a 2in diameter tube frame over 14 gauge steel, finished in textured black powder coat that hides scuffs and shrugs off weather.

The design is loaded with the details that usually cost extra elsewhere. Mount points for auxiliary lights are built in, an LED cutout mesh cover is included, and both a license plate swing mount and a trailer connector bracket come in the box so the rear end looks finished rather than improvised. It is available for trucks with or without factory backup sensors, and the sensor L-tab is included to relocate them properly. The mount kit is included and installation is bolt on with no drilling required, though you will be disconnecting the license plate lights, trailer connector and park assist sensors to get the factory bumper off.

Features

• Mount kit included
• 2in diameter tube frame over 14 gauge steel
• Equipped with mount points for auxiliary lights
• Available for vehicles with or without backup sensors, sensor L-tab included
• Bolt on installation with no drilling required
• LED cutout mesh cover included
• License plate swing mount included
• Trailer connector bracket included
• Textured black powder coat finish

Notes

• NOT COMPATIBLE WITH THE OEM HITCH. Westin states: THIS BUMPER IS NOT COMPATIBLE WITH OEM HITCH. HITCH 58-81075H IS AVAILABLE TO REPLACE OEM HITCH AND WORK WITH THIS BUMPER. The replacement hitch is a separate purchase.
• Does NOT fit the Ram 1500 Classic.
• Installation requires disconnecting the license plate lights, trailer connector and park assist sensors to remove the factory bumper.
• Tools required: 18mm, 13mm, 17mm, 19mm and 10mm wrenches and sockets, 5mm allen, plier tool, ratchet, torque wrench and electrical tape.